> >

V-1

Long. Travel 40 in.
Cross Travel 16 in.
Taper, HP NT-40, 5 hp
Slide Ways Box Ways
Spindle Digital Variable Speed
Video
Request a Quote
Download Brochure
Overview
Features
Specs
Accessories

Overview

This model is built for heavy cutting. The boxways on the vertical column and top of base allow extra support to the table under hard machining. The size of the saddle is extra wide to support the table to avoid over hang. The top of the saddle is coated with TURCITE-B for better retention of oil and wear resistant.

  • 12 x 58 ins  table, 16  x 40  ins  travel
  • Hardened and ground box ways
  • #40 taper, 5 hp spindle motor
  • Digital Variable Speed spindle
  • Power feed table and saddle
  • Motorized rapid knee for easy positioning

Product Video

Features

Digital Variable Speed Head

  • Easy speed change. Just turn the knob
  • Machine works on Single Phase or 3 phase motor
  • Low voltage control
  • Safety feature includes preventing self-start after power failure of E stop

Optional Riser Block

The optional  rise block that sits between the vertical column and the overarm raises the distance from spindle to top of table. This allows taller work piece to be placed on the table for machining instead of getting a larger machine.

TURCITE-B coating Auto lubrication

The top of the saddle is coated with TURCITE-B for better retention of lubricating oil and protects wearing of the slideways after long term usages.

The auto lubrication system delivers oil to all the sliding ways through well placed lubricating channels. The system is designed with back flow valves to prevent oil from flowing back towards the reservoir.

Boxways on column and knee

Hardened and ground boxways are designed for the vertical column and the top of the base to offer resistance to the table under heavy machining conditions.

Patented Knuckle Head design

The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)

Better motor shaft support

Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation.

Specs

Capacity Inch Metric
Table Size12 x 58 in.304.8 x 1,473.2 mm
T-slots (No., Size, Pitch)3, 5/8, 2.5 in. 3, 16, 63.5 mm
Table Travel : X Longitudinal40 in.1,016 mm
Table travel : Y Cross16 in.406.4 mm
Quill travel: Z Vertical 5 in. 127 mm
Knee travel : Vertical16 in.406.4 mm
Ram Travel 17.8 in452.12 mm
Spindle Nose to Table Top2-18 in. 50.8-457.2 mm
Head, Spindle Inch Metric
Spindle Nose Taper

NT-40
Spindle Variable Speed Range70-4,000 rpm
Spindle Motor (220V/440V)5 HP 3.72 KW
Quill Feed (Inch/Min)(3 speeds)0.015, .003, .006 in.0.015, 0.076, 0.152 mm
Quill Diameter4.12 in. 104.64 mm
Head Swivel Angle360°
Head Tilt Angle (L/R)+/- 90°
Head Tilt Angle (Up/Down)+/-45°
General Inch Metric
Floor Area (W x D x H)

9.8 x 6.25 x 8.33 ft

2.98 x 1.90 x 2.53 M

Approximate Weight4,500 lbs. 2,041.16 Kg
Power Consumption (220V)3 KVA/8 amps
Power Consumption (440V)3 KVA/4 amps

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • Power feed table and saddle
  • Motorized rapid knee positioning
  • Coolant System
  • Front and Rear Rubber Way Cover
  • Auto-lube System
  • Rubber Way Cover at back of Saddle
  • Halogen Worklight

Optional Accessories

    • 440V Transformer
    • Power Draw Bars
    • “Align” Power Draw Bar w/Foot Pedal Control
    • “Maxi Torque Rite” Power Draw Bar
    • 6 in. Kurt Vise with Swivel Base
    • Right Angle Milling Attachment w/ Arbor (#40)
    • Riser blocks, 4 ins, 6 ins, 8 ins , sizes
    • Drill Chuck & Drill Arbor
    • Clamping Kit (52 pcs/steel racks
    • Digital Readout System
Quote$
Get A Quote

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Request a Quote
Package
Connect With a Dealer

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Contact Sharp
Envelope
NEWSLetter

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Sign Up

Start typing and press enter to search

Scroll to Top