LMV-49-DVS

Long. Travel 37 in.
Cross Travel 12 in.
Taper, HP R-8, 3 hp
Slide Ways Dove Tail
Spindle Digital Variable Speed

Overview

This model is equipped with Digital Variable Speed for easy change of spindle speeds.

The model has many unique features compared with most of the similar machines on the market. The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed.  Tapered gibs installed on the ways allows easy adjustment for long term usage. The feed handles are designed to spin free which eliminates the friction between the operator’s hand and the feed handle. The bottom of the saddle, instead of the top of the knee ways,  which rides on the knee is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.

  • 9 x 49 ins table, 12 x 36.6 in. travel
  • Digital Vari speed (DVS), speed change by turning a knob, with digital display of spindle speed
  • R-8 spindle, 3 hp , speed (60-4,500 rpm)
  • Spindle runout of no more than 0.0002 ins TIR
  • Hard chromed ways provide long wear resistance
  • Head tilt side to side, up and down
  • One shot lubrication with back flow valve
  • Tapered gibs for adjustment
  • Dual clamps on knee and saddle that locks the knee and table evenly to the column and saddle to avoid skewing. Handles on the clamp are adjustable to 12 different positions.

Product Video

Features

Digital Variable Speed Head

  • Easy speed change. Just turn the knob
  • Machine works on Single Phase or 3 phase motor
  • Low voltage control
  • Safety feature includes preventing self-start after power failure of E stop

Improved design of Backlash Eliminator

Backlash Eliminator By Double Nut Design replaces the older design that squeezes a split nut to get rid of backlash. Sharp is the first one to use a double nut design that keeps the feed screw in contact with a pair of bronze nuts. Using a custom tool supplied with the mill, the feed nuts are adjusted to control backlash and held tight with a retaining nut and locking ring.

Patented Knuckle Head design

The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)

Better motor shaft support

Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation

Crank Handle Improvements

Thrust Bearings mounted at the end of the table and saddle pre-load the feed screw, eliminating end play for precisely controlled lateral movements.

Specs

Capacity Inch Metric
Table Size9 x 49 in. 230 x 1244 mm
T-slots (No., Size, Pitch)3, 5/8, 2.5 in. 3, 16, 63.5 mm
Table Travel : X Longitudinal36.6 in. 929 mm
Table travel : Y Cross12 in.304 mm
Quill travel: Z Vertical 5 in. 127 mm
Knee travel : Vertical16 in. 406 mm
Ram Travel 12 in. 304.8 mm
Spindle Center to Column6.75 - 18.5 in.

171 - 470 mm

Spindle Nose to Table Top2.125 - 18 in. 3.1 - 457 mm
Head, Spindle Inch Metric
Spindle Nose TaperR-8 R-8
Spindle Variable Speed Range65-4500 rpm 65-4500 rpm
Spindle Motor (220V/440V)3 HP 2.25 KW

Quill Feed (Inch/Rev)(3 speeds)

.0015, .003, .006 in..038, .076, .152 mm
Quill Diameter3.375 in. 85.7 mm
Head Swivel Angle360°
Head Tilt Angle (L/R)45°
Head Tilt Angle (Up/Down)45°
General Inch Metric
Floor Area (W x D x H)   7 x 6.5 x 6.75 ft.2.1 x 2 x 2 M
Approximate Weight2,100 lbs. 952 Kg.
Power Consumption (220V)3 KVA/8 amps
Power Consumption (440V)3 KVA/4 amps

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • One Shot Lube System
  • Hard-Chromed Ways
  • Front and Rear Rubber Way Covers
  • Tool box with tools
  • Wired 220V or 440V.

Optional Accessories

  • Auto Lube Pump with 2 Adjustments
  • “Sharp” Power Table Feed with Safety Handle
  • “Sharp” Power Cross Feed with Safety Handle
  • “Sharp” Power Knee Feed with Safety Handle
  • 6 in. “Kurt” Vise with Swivel Base
  • Right Angle Milling Attachment with Arbor            
  • Drill Chuck & Drill Arbor                                      
  • 6 in. Riser Block                                                                  
  • Coolant System with Chip Pan (pump included
  • “Maxi Torque Rite” Power Draw Bar
  • Clamping Kit (52 pcs/Steel Rack)              
  • Halogen Work light
  • CE mark
  • 380V and 575V transformer  
  • UL components upgrade with electrical box
  • UL compliance certificate under State of California
  • Digital Readout System

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top