Travel 29.92 x 23.62 x 19.69 in.
Trunnion Table 11.8 in.
A Axis Travel 30 – 120°
C Axis Rotates 360°


This is a 5 axis Linear Roller Guide C frame machining center with Roller Cam Bearing Trunnion Table. It can perform 5 sided (4+1 applications) and 5 axis simultaneous machining. The machine is designed for high speed, high precision and high productivity machining. It is ideal for aerospace, medical and mold making industries.

  • FANUC 31iB5, 10.4” LCD color screen
  • Travel: X/Y/Z: 30″/ 23.6″/ 19.7″
  • Max Working Load : 330 Lbs
  • Trunnion Table: A/C Diameter: 9.8″/ 11.8″, A/C Degree: -120 to + 30/ 360
  • Roller Cam type trunnion table
  • Spindle: 12K Rpm, CAT 40 Big Plus, Direct Driven, 15 HP Motor
  • ATC: Side Mount 24 Tools
  • Position Accuracy: X/Y/Z (+/- 0.0002″)
  • Repeatability Accuracy: X/Y/Z (+/- 0.00012″)
  • Machine Size: without Chip Conveyor: W/D/H (119″/ 91.73″/ 124.41″)
  • A/C Axis Position Accuracy: +/- 15 Arc Sec
  • A/C Axis Repeatability: 6 Arc Sec
  • Coolant Nozzle: 2; Air Blow Nozzle: 1
  • Coolant Tank Capacity: 42 Gal
  • Electrical: 220V/ 3 phase / 35 KVA


Precision through Craftsmanship and Technology

Structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy (straightness and squareness) of the whole assembly. This provides near perfect alignment assuring long term accuracy. 

High Precision Spindle

The rigid spindle is mounted on 2 matched pairs of high precision angular contact bearings (ABEC 7) and one ball bearing at the rear. These bearings are designed to withstand axial and radial loads thus ensure accuracy in machining in all axes.

Fanuc 31i-B5 CNC control

10.4” color LCD screen, tool path graphics, built-in 3D interface, high speed HRV3 function, AICC II (200 blocks look ahead), high speed smooth TCP, 3 dimensional cutter, rigid tapping, detachable electronic handwheel (MPG), RS232 interface, USB port and embedded Ethernet.

High Precision, Zero Backlash Trunnion Table

The trunnion table is designed with roller cam bearing components offering zero backlash movements and superior wear resistance.

BLUM Z-nano Tool setter

BLUM Z-nano Tool setter for tool breakage detection and tool length measurement BLUM T-60 Touch probe to identify and set-up parts, measure features in‑cycle for adaptive machining, monitor workpiece surface condition and verify finished component dimensions. Above two devices are standard on the machine.
Minimize handling and maximize productivity with the SVX Series from SHARP.


Work Capacity InchMetric
X axis travel 29.92 in. 760 mm
Y axis travel 23.62 in. 600 mm
Z axis travel 19.69 in. 500 mm
A axis travel (tilting) -120 to +30'-120 to +30'
C axes travel (rotation) 360°360°
Spindle nose to table (A= 0°) 3.94 -23.62 in. 100-600 mm
Spindle center to column 26.77 in. 680 mm
Table Area InchMetric
Max Work Piece Weight 330 lbs. 150 kg
T-Slot (No. x Width x degree)4 x 0.55 x 90 degrees 4 x 14 mm x 90 degrees
Trunnion Table A axis: 9.84 in. / C axis: 11.8 in. A axis: 250 mm / C axis: 300 mm
Spindle InchMetric
Spindle taper ISO 7/24 40 Taper CAT Big plus ISO 7/24 40 Taper CAT Big plus
Spindle speed 12,000 ceramic bearing 12,000 ceramic bearing
Spindle motor: cont./30 min10/15 hp 7.5/11 kw
Spindle torque: 30 min rating 51 ft-lb. at 1500 rpm / 20 ft-lb at 4000 rpm70 Nm at 1500 rpm / 27 at 4000 rpm
Transmission Direct Coupling Direct Coupling
Automatic Tool Changer InchMetric
ATC type Side MountSide Mount
Tool capacity 2424
Max. tool diameter 2.95 in. 75 mm
Without adjacent tool 5.9 in. 150 mm
Max. tool length 11.8 in. 300 mm
Max. tool weight 15.4 lbs. 7 kg
Method of tool selection RandomRandom
Motion InchMetric
Rapid traverseX/Y/Z: 1417.32 ipmX/Y/Z: 36,000 mm/min.
Cutting feed rate 393.7 ipm 10,000 mm/min.
Feed motor (Fanuc) X: 4 HP / Y/Z: 5 HP X: 2.98 Kw / Y/Z: 3.72 Kw
X/Y/Z Positioning accuracy 0.0002 in. 0.005 mm
X/Y/Z Repeatability accuracy 0.00012 in. 0.003 mm
A/C axis position accuracy +/- arc sec1515
A/C axis repeatability accuracy +/- arc sec66
Ballscrew diameter, X/Y/Z1.57 in. 40 mm
Coolant System InchMetric
Coolant tank capacity 63.2 gal 240 L
Number of Flood Coolant Nozzles 22
Machine Size InchMetric
Floor space (w/o chip conveyor) W: 118.1 in. x D: 91.7 in. W: 3000 mm x D: 2330 mm
Height 124.4 in. 3160 mm
Weight16,500 lbs. 7500 kg
Door opening 43.3 in. 1100 mm
Power Requirements InchMetric
Electrical 220V / 60 Hz / 3 Phase / 35 KVA220V / 60 Hz / 3 Phase / 35 KVA
Air 6 CFM at 88 psi 6 CFM at 88 psi

All specifications subject to change without notice. Please call to verify.


Standard Accessories

  • BLUM Touch Probe and Tool Setter
  • Internal Chip Auger
  • Spindle Chiller
  • Coolant Through Spindle (CTS) prepped
  • Coolant Gun, Air Gun
  • Electric Cabinet Heat Exchanger
  • 4 Extra M Code
  • Removable Hand Wheel (MPG)
  • Air Reservoir Tank with Alarm
  • LED Work Light
  • M 30 Auto Power Off
  • Door Interlock
  • Chip Coolant Flush
  • 512 K memory
  • USB Port, CF Card, RS-232 I/F, Embedded Ethernet
  • Rigid Tapping, 200 Blocks Look Ahead

Optional Accessories

  • 2 G data server
  • 2MB Memory
  • Oil skimmer
  • 3 axes linear scale by MITUTOYO
  • CTS pump
  • 70 bar CTS prepped at factory (FANUC hollow motor shaft upgrade)
  • Hinge type flat chip conveyor with bucket
  • Scraper type chip conveyor with bucket recommended for non-ferrous material

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top