> >

LMV-42

Long. Travel 30 in.
Cross Travel 12 in.
Taper, HP R-8, 3 hp
Slide Ways Dove Tail
Spindle Variable Speed
Video
Request a Quote
Download Brochure
Overview
Features
Specs
Accessories

Overview

This model has many unique features compared with most of the other similar machines on the market.

The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed.

Tapered gibs installed on the ways allows easy adjustment for long term usage..

The bottom of the saddle, instead of the top of the knee ways, which rides on the knee, is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.

  • 9 x 42 ins table, 12 x 30 in.  travel
  • R-8 spindle, 3 hp , variable speed (60-4,500 rpm)
  • Spindle runout of no more than 0.0002” TIR
  • Hardened & Ground Ways for X, Y, and Z Axis,  Turcite B Coating will be included on X and Y gib for additional oil retention and longer wear resistance
  • Head tilt side to side, up and down
  • One shot lubrication with back flow valve
  • Tapered gibs for adjustment
  • Dual clamps on knee and saddle that locks the knee and table evenly to the column and saddle to avoid skewing. Handles on the clamp are adjustable to 12 different positions.

Product Video

Features

Improved design of Backlash Eliminator

Backlash Eliminator By Double Nut Design replaces the older design that squeezes a split nut to get rid of backlash. Sharp is the first one to use a double nut design that keeps the feed screw in contact with a pair of bronze nuts. Using a custom tool supplied with the mill, the feed nuts are adjusted to control backlash and held tight with a retaining nut and locking ring.

Patented Knuckle Head design

The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)

Better motor shaft support

Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation

Patented sliding variable disc movement

Easy Access Lubricating Shaft is designed with an oil channel in the center that is fed by a grease fitting at the lower end for longer motor shaft life. (Patent No. 2848)

Crank Handle Improvements

Thrust Bearings mounted at the end of the table and saddle pre-load the feed screw, eliminating end play for precisely controlled lateral movements.

Specs

Capacity

Inch

Metric

Table Size

9 x 42 in.

230 x 1270 mm

T-slots (No., Size, Pitch)

3, 5/8, 2.5 in.

3, 16, 63.5 mm

Table Travel : X Longitudinal

30 in.

762 mm

Table travel : Y Cross

12 in.

304 mm

Quill travel: Z Vertical

5 in.

127 mm

Ram Travel

12 in.

304.8 mm

Knee travel : Vertical

16 in.

406 mm

Spindle Center to Column

6.75 - 18.5 in.

171 - 470 mm

Spindle Nose to Table Top

2.125 - 18 in.

3.1-457 mm

Head, Spindle

Inch

Metric

Spindle Nose TaperR-8R-8
Spindle Variable Speed Range60 - 4500 rpm60 - 4500 rpm
Spindle Motor (220V/440V)

3 HP

2.25 KW

Quill Feed (Inch/Rev)(3 speeds)

.0015, .003, .006 in.

.038, .076, .152 mm

Quill Diameter

3.375 in.

85.7 mm

Head Swivel Angle360°360°
Head Tilt Angle (L/R)45°45°
Head Tilt Angle (Up/Down)45°45°
General

Inch

Metric

Floor Area (W x D x H)

7.3 x 5.6 x 6.8 ft.

2.2 x 1.7 x 2 M

Approximate Weight

2,400 lbs.

1,090 Kg.

Power Consumption (220V)3 KVA/8 amp3 KVA/8 amp
Power Consumption (440V)3 KVA/4 amp3 KVA/4 amp

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • One Shot Lube System
  • Hard-Chromed Ways
  • Front and Rear Rubber Way Covers
  • Tool box with tools
  • Wired 220V or 440V.

Optional Accessories

  • Auto Lube Pump with 2 Adjustments
  • “Sharp” Power Table Feed with Safety Handle
  • “Sharp” Power Cross Feed with Safety Handle
  • “Sharp” Power Knee Feed with Safety Handle
  • 6 ins “Kurt” Vise with Swivel Base
  • Right Angle Milling Attachment with Arbor            
  • Drill Chuck & Drill Arbor                                      
  • 6 in. Riser Block                                                                  
  • Coolant System with Chip Pan (pump included
  • “Maxi Torque Rite” Power Draw Bar
  • Clamping Kit (52 pcs/Steel Rack)              
  • Halogen Work light
  • CE mark
  • 380V and 575V transformer  
  • UL components upgrade with electrical box
  • UL compliance certificate under State of California
  • Digital Readout System
Quote$
Get A Quote

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Request a Quote
Package
Connect With a Dealer

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Contact Sharp
Envelope
NEWSLetter

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Sign Up

Start typing and press enter to search

Scroll to Top