
TMV-DVS
Long. Travel | 39 in. |
---|---|
Cross Travel | 16.3 in. |
Taper, HP | R-8, 3 hp |
Slide Ways | Box Ways |
Spindle | Digital Variable Speed |
Long. Travel | 39 in. |
---|---|
Cross Travel | 16.3 in. |
Taper, HP | R-8, 3 hp |
Slide Ways | Box Ways |
Spindle | Digital Variable Speed |
This model is constructed with box ways. The vertical head is equipped with Digital Variable Speed.
This model has many unique features compared with most of the similar machines on the market.
The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed.
Tapered gibs installed on the ways allows easy adjustment for long term usage.
The feed handles are designed to spin free which eliminates the friction between the operator’s hand and the feed handle.
The bottom of the saddle, instead of the top of the knee ways, which rides on the knee, is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.
Hardened and Ground box ways on the vertical column and base offer extra support under heavy cutting conditions.
Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation.
Capacity | Inch | Metric |
---|---|---|
Table Size | 10 x 54 in. | 254 x 1371.6 mm |
T-slots (No., Size, Pitch ) | 3 slots, 5/8 in. | |
Table Travel : X Longitudinal | 39 in. | 990.6 mm |
Table travel : Y Cross | 16.3 in. | 414.02 mm |
Quill travel: Z Vertical | 5 in. | 127 mm |
Ram Travel | 18.5 in. | 469.9 mm |
Knee travel : Vertical | 15.3 in. | 388.62 mm |
Spindle Nose to Table Top | 5.37-16.9 in. | 136.3-429.26 mm |
Head, Spindle | Inch | Metric |
---|---|---|
Spindle Nose Taper | R-8 | |
Spindle Variable Speed Range | 60-4,500 rpm | |
Spindle Motor (220V/440V) | 3 HP | 2.23 Kw |
Quill Feed (Inch/Rev)(3 speeds) | 0.0015, 0.003, 0.005 in. | 0.0381, 0.0762, 0.127 mm |
Quill Diameter | 3.37 in. | 85.59 mm |
Head Tilt Angle (L/R) | 90° | |
Head Tilt Angle (Up/Down) | 45° |
General | Inch | Metric |
---|---|---|
Floor Area (W x D x H) | 9.83 x 6.25 x 7.64 ft. | 2.99 x 1.90 x 2.32 M |
Approximate Weight | 3,000 lbs. | 1360.7 Kg |
Power Consumption (220V) | 3 KVA/8 amps | |
Power Consumption (440V) | 3 KVA/4 amps |
All specifications subject to change without notice. Please call to verify.
TMV-DVS-K1-A
Equipped with the following components:
TMV-DVS | 10″ x 54″ TABLE, 16.3″ x 39″ TRAVEL, R-8 SPINDLE, 3 HP MOTOR, DIGITAL VARIABLE SPEED, 60-4,500 RPM, HARDENED AND GROUND BOX WAYS,O ne Shot Lube System,BACKLASH ELIMINATOR TOOL,Fro nt and Rear Rubber Way Covers,T ol box with tools, WIRED FOR 220V OR 440V, 3-PHASE OR 1-PHASE (TRANSFORMER REQUIRED FOR 440V OPERATION). |
*SP-250A | “SHARP” POWER TABLE FEED WITH SAFETY HANDLE (X-AXIS) * SEE NOTE |
FACTORY INSTALLATION | FACTORY INSTALLATION – TABLE FEED (SP-250A) |
TR-100 | “MAXI TORQUE RITE” POWER DRAW BAR |
FACTORY INSTALLATION | POWER DRAW BAR (MAXI-TORQUE) |
AR-TMV-3AQ | ”D.R.O.”TMV/TMV-I 3-AXES ON QUILL |
FACTORY INSTALLATION – D.R.O. | 3-AXES D.R.O. |
TMV-DVS-K1-N
Equipped with the following components:
TMV-DVS | 10″ x 54″ TABLE, 16.3″ x 39″ TRAVEL, R-8 SPINDLE, 3 HP MOTOR, DIGITAL VARIABLE SPEED, 60-4,500 RPM, HARDENED AND GROUND BOX WAYS, One Shot Lube System, BACKLASH ELIMINATOR TOOL, Front and Rear Rubber Way Covers, Tool box with tools, WIRED FOR 220V OR 440V, 3-PHASE OR 1-PHASE (TRANSFORMER REQUIRED FOR 440V OPERATION). |
*SP-250A | “SHARP” POWER TABLE FEED WITH SAFETY HANDLE (X-AXIS) * SEE NOTE |
FACTORY INSTALLATION | FACTORY INSTALLATION – TABLE FEED (SP-250A) |
TR-100 | “MAXI TORQUE RITE” POWER DRAW BAR |
FACTORY INSTALLATION | POWER DRAW BAR (MAXI-TORQUE) |
NWN-TMV-3AQ | ”D.R.O.”TMV/TMV-I 3-AXES ON QUILL |
FACTORY INSTALLATION – D.R.O. | 3-AXES D.R.O. |
TMV-DVS-K2-A
Equipped with the following components:
TMV-DVS | 10″ x 54″ TABLE, 16.3″ x 39″ TRAVEL, R-8 SPINDLE, 3 HP MOTOR, DIGITAL VARIABLE SPEED, 60-4,500 RPM, HARDENED AND GROUND BOX WAYS,One Shot Lube System,BACKLASH ELIMINATOR TOOL,Front and Rear Rubber Way Covers,Tool box with tools,Wired 220V or 440V.“(additional needs transformer)”. |
*SP-250A | “SHARP” POWER TABLE FEED WITH SAFETY HANDLE (X-AXIS) * SEE NOTE |
FACTORY INSTALLATION | FACTORY INSTALLATION – TABLE FEED (SP-250A) |
TR-100 | “MAXI TORQUE RITE” POWER DRAW BAR |
FACTORY INSTALLATION | POWER DRAW BAR (MAXI-TORQUE) |
SP-250B | “SHARP” POWER CROSSFEED WITH SAFETY HANDLE (Y-AXIS) |
FACTORY INSTALLATION | FACTORY INSTALLATION – CROSS FEED (SP-250B) |
SP-250D | “SHARP” POWER KNEEFEED |
FACTORY INSTALLATION | FACTORY INSTALLATION – KNEE FEED (SP-250D) |
AR-TMV-3AQ | ”D.R.O.”TMV/TMV-I 3-AXES ON QUILL |
FACTORY INSTALLATION – D.R.O. | 3-AXES D.R.O. |
TMV-DVS-K2-N
Equipped with the following components:
TMV-DVS | 10″ x 54″ TABLE, 16.3″ x 39″ TRAVEL, R-8 SPINDLE, 3 HP MOTOR, DIGITAL VARIABLE SPEED, 60-4,500 RPM, HARDENED AND GROUND BOX WAYS,One Shot Lube System,BACKLASH ELIMINATOR TOOL,Front and Rear Rubber Way Covers,Tool box with tools,Wired 220V or 440V.“(additional needs transformer)”. |
*SP-250A | “SHARP” POWER TABLE FEED WITH SAFETY HANDLE (X-AXIS) * SEE NOTE |
FACTORY INSTALLATION | FACTORY INSTALLATION – TABLE FEED (SP-250A) |
TR-100 | “MAXI TORQUE RITE” POWER DRAW BAR |
FACTORY INSTALLATION | POWER DRAW BAR (MAXI-TORQUE) |
SP-250B | “SHARP” POWER CROSSFEED WITH SAFETY HANDLE (Y-AXIS) |
FACTORY INSTALLATION | FACTORY INSTALLATION – CROSS FEED (SP-250B) |
SP-250D | “SHARP” POWER KNEEFEED |
FACTORY INSTALLATION | FACTORY INSTALLATION – KNEE FEED (SP-250D) |
NWN-TMV-3AQ | ”D.R.O.”TMV/TMV-I 3-AXES ON QUILL |
FACTORY INSTALLATION – D.R.O. | 3-AXES D.R.O. |
Long. Travel | 30 in. |
---|---|
Cross Travel | 12 in. |
Taper, HP | R-8, 3 hp |
Slide Ways | Dove Tail |
Spindle | Variable Speed |
Long. Travel | 37 in. |
---|---|
Cross Travel | 12 in. |
Taper, HP | R-8, 3 hp |
Slide Ways | Dove Tail |
Spindle | Digital Variable Speed |
Long. Travel | 37 in. |
---|---|
Cross Travel | 12 in. |
Taper, HP | R-8, 3 hp |
Slide Ways | Dove Tail |
Spindle | Variable Speed |
Long. Travel | 39 in. |
---|---|
Cross Travel | 16.3 in. |
Taper, HP | R-8, 3 hp |
Slide Ways | Box Ways |
Spindle | Variable Speed |
Long. Travel | 39 in. |
---|---|
Cross Travel | 16.3 in. |
Taper, HP | NT-40, 5 hp |
Slide Ways | Box Ways |
Spindle | Variable Speed |
Long. Travel | 40 in. |
---|---|
Cross Travel | 16 in. |
Taper, HP | NT-40, 5 hp |
Slide Ways | Box Ways |
Spindle | Digital Variable Speed |
Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.
Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.
Register to keep up to date with our monthly newsletter containing the latest information and specials.