SVG-6336A-F

Travel63 x 35 x 28 in.
Taper, RPM40, 6k
Tool Capacity32T
Spindle Motor35 hp

Overview

The Sharp SVG series was engineered from the ground up for hard metal machining. This is a extremely rigid “C” frame design using 4 hardened and ground box ways. All structural components are made of Meehanite casting with internal ribs running throughout each section. Precision hand scraping of each section provides near perfect alignment assuring long term accuracy. The gearhead spindle is equipped with 35 HP motor, 6,000 rpm, CAT 50 spindle.

  • FANUC Oi-MF, 10.4” LCD color screen
  • Travel: X/Y/Z: 63″/ 43″/27.56″, Table: 71″ x 31.5″
  • 4 Box Ways (Hardened and Ground)
  • Spindle: 6K rpm, CAT 50 Geared Head, 35 HP Motor
  • ATC: Side mount: 32T
  • Position Accuracy: X/Y/Z (0.0003″ within 12″)
  • Repeatability : X/Y/Z (+/- 0.0002 within 12″)

Features

Precision through Craftsmanship and Technology

Structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy (straightness and squareness) of the whole assembly. This provides near perfect alignment assuring long term accuracy. 

4 Box way design

The 4 slide ways are hand scraped, hardened and ground. Box ways have superior vibration damping capacity than linear ways and can be used on severe machining applications. During a crash, they are less susceptible to damage due to large contact surface.

Gearhead High Precision Spindle

The gearhead spindle delivers greater torque output for heavy duty machining. The high quality gears (by HAMADA) are hardened and ground for durability, high accuracy and minimum noise. The gear box has circulating type filtration system to keep the lubricating oil clean. Hi-Low speed change is automatically controlled through the CNC system.

Laser Calibration, Ball Bar Test

The accuracy and repeatability of the machine is calibrated by laser interferometer. The ball bar test ensures the actual circular path matches the programmed circular path.

High Performance Heavy Duty Spindle

Geared head spindle has CAT 50 taper, 35 HP motor, and 6,000 rpm. Spindle air blast blows away small chips during each tool change. Spindle chiller performs thermal management of the spindle. The spindle is supported by matched pair of high precision (P4 class) of angular contact bearings providing radial and axial thrust support.

Specs

Work CapacityInchMetric
X axis travel62.99 in.1600 mm
Y axis travel35.43 in.900 mm
Z axis travel27.56 in.700 mm
Spindle nose to table0-22.95 in.200-900 mm
Spindle center to column33.46 in.850 mm
WorktableInchMetric
Table area70.87 x 31.5 in.1800 x 800 mm
Floor to table41.73 in.1060 mm
Max. workpiece weight5511 lbs.2500 Kg.
T-Slot (Number x Width x Pitch)22 x 6T x 6.3 in.22 x 6T x 160mm
Spindle
Spindle taperCAT 50CAT 50
Spindle speed6000 rpm6000 rpm
Spindle motor: cont./30 min22/26 Kw22/26 Kw
Spindle torque: 30 minutes427 ft-lb(α22i / 6000rpm)579Nm (α22i / 6000rpm)
Spindle motor modelα22iα22i
Transmission2 speed gear2 speed gear
Low / high ratio(1:3:5) / (1:1)(1:3:5) / (1:1)
Spindle bearing ID3.94 in.100 mm
Spindle LubricationGreaseGrease
Spindle coolingChilled OilChilled Oil
Tool clamp force1800 kgf1800 kgf
Automatic Tool ChangerInchMetric
ATC typeSide MountSide Mount
Tool capacity40T40T
Max. tool diameterø5 in.ø127 mm
Without adjacent toolø9.84 in.ø250 mm
Max. tool length11.81 in.300 mm
Max. tool weight33 lbs.15 Kg
Tool change time (tool to tool)4.39 sec.(cam-box-only)4.39 sec.(cam-box-only)
Method of tool selectionBi-direction RandomBi-direction Random
MotionInchMetric
Rapid traverse590 / 590 / 472 in/min15 / 15 / 12 M/min
Cutting feed rate236 in/min6 M/min
Ball screw diameter / pitch: X/Y/Zø50 x Pitch 10ø50 x Pitch 10
Feed motor - Fanuc: X/Y/Zα22i / α22i / α30iBα22i / α22i / α30iB
Positioning accuracy*0.01 mm(JIS Standard)0.01 mm(JIS Standard)
Repeatability accuracy*0.006 mm(JIS Standard)0.006 mm(JIS Standard)
GuidewaysInchMetric
Type (all axis)Square guide way with turcite BSquare guide way with turcite B
Way size / spacing (X axis)4.84+4.84 in. / 23.86 in.123+123mm / 606 mm
Way max size / spacing (Y axis)4.72+4.72+4.72+4.72 in. / 55.91 in.120+120+120+120mm / 1420 mm
Way size / spacing (Z axis)7.09+7.09 in. / 23.62 in.180+180mm / 600 mm
Coolant SystemInchMetric
Coolant tank capacity132 gal500 L
Flood coolant pressure290 psi20 Bar
GeneralInchMetric
Floor space175.5 x 144.84 x 137.8 in.4450 x 3679 x 3500 mm
Height137.8 in.3500 mm
Weight35274 lbs.16000 Kg.
Operator door opening78.74 in.2000 mm
Power RequirementsInchMetric
Electrical40 KVA40 KVA
Air80-110 psi6-8kg/cm2

Accessories

Standard Accessories

  • Air Reservoir Tank with Alarm
  • Oil Skimmer
  • Spindle chiller
  • 4th Axis Prepped (No Motor, No Drive)
  • Rigid Tapping, NANO interpolation
  • 30 Bar CTS Prepped
  • Coolant Gun, Air Gun
  • Full Enclosure, door interlock
  • Electric Cabinet Heat Exchanger
  • 4 Extra M Code
  • 1024 K Memory, USB Port, CF Card, RS-232 I/F, Embedded Ethernet
  • Coolant Tank Capacity: 148 Gal

Optional Accessories

  • 40 tools ATAC in lieu of 32T
  • 2 MB part program storage
  • AICC 200 blocks look ahead
  • Rotary table

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top