> >

1640LV

Swing 16 in.
Center Distance 40, 60 & 80 in.
Bore, HP 3.1 in., D1-8, 7.5 hp
Spindle Speed 20 – 2,000 rpm (2), vari.
Video
Request a Quote
Download Brochure
Overview
Features
Specs
Accessories

Overview

This model is designed with 3.18” spindle hole which is unique for 16” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows most 3” diameter oil pipes to be machined. The variable speed spindle allows easy change of speeds.

  • 16″x 40″, geared head, D1-8 camlock, 3.18″ bore, 7.5 HP, vari speed 20-2,000 rpm (Hi, Low)
  • Direct selection for inch/metric threads
  • One piece Meehanite casting  bed

Product Video

Features

  • 3.18” spindle bore , largest spindle in this size lathes. More choices for different diameter of materials to be machined.
  • All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining
  • One piece casting bed instead of sheet metal connected legs ensure dampening of vibration and permanent straightness of the bed ways.
  • The carriage and cross slide ways are lubricated by push button knobs.
  • The removable gap increases the swing by an extra 8” to accommodate larger work pieces that are short in length
  • 5 position carriage stop for pre-positioning of carriage feed distance.
  • “Tang” in tail stock for easy “knock out” of centers in tailstock
Special package is available that includes 2 axis Digital Readout, Chuck guard with limit switch, steady rest, follow rest and work light
The Digital Variable Speed spindle allows easy change of speeds by just turning a knob. The headstock is equipped with High/low gear for light/heavy operations.
  • All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining
  • High precision pair of matched angular contact bearings supporting the front end of head stock, and rolling bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions.
  • Wide range of feeds and threads. Selection done by “pull and lock” handles to avoid slipping in engagement of gears.
  • Jog button is equipped at headstock for easy engagement of gears before cutting

Specs

Capacity

Inch

Metric

Swing Over Bed

16 in.

406 mm

Swing Over Cross Slide

8.75 in.

222.25 mm

Swing Over Gap

24.37 in.

618.9 mm

Gap Width
(In Front Of Face Plate)

9.75 in.

247.6 mm

Distance Between Centers

40 in.

1,016 mm

Headstock

Inch

Metric

Spindle SpeedHi: 235-2,000 rpm
Low: 20-170 rpm

Hi: 235-2,000 rpm

Low: 20-170 rpm

No. of Spindle Speeds1212
Spindle NoseD1-8 camlock D1-8 camlock
Spindle Bore

3.06 in.

77.72 mm

Threads and Feeds

Inch

Metric

Inch Threads, Number4-56 tpi, 36

0.5-7 mm, 17

Diametral Pitch Threads, Number

0.157-2.20 in, 36

4-56 mm, 36

Longitudinal Feeds

0.002-0.032 in./rev

0.05-0.82 mm/rev

Cross Feeds

0.0001-0.0094 in./rev

0.02-0.4 mm/rev

Leadscrew Pitch, Diameter  4 tpi, 1.37 in. 4 tpi, 1.37 in.

Carriage

Inch

Metric

Cross Slide Travel

9.8 in.

250 mm

Compound Travel

4.9 in.

124.4 mm

Compound Width

4.5 in.

114.3 mm

Bed

Inch

Metric

Bed Length

59 in.

1,498.6 mm

Bed Width

11.75 in.

298.4 mm

Tailstock

Inch

Metric

Quill Diameter

2.25 in.

57.15 mm

Quill Travel

5 in.

127 mm

Quill Center TaperMT #4 MT #4

General

Inch

Metric

Spindle Motor

7.5 HP

5.59 Kw

Voltage230V/460V

230V/460V

Phase3 phase 3 phase

Power Consumption

(230 V)

8KVA/25 amps8KVA/25 amps
Power Consumption
(460 V)		8KVA/12.5 amps8KVA/12.5 amps
Approximate Weight

3,600 lbs.

1,632.9 Kg

Dimensions

7.05 x 2.66 x 3.91 ft.

2.15 x 0.81 x 1.19 M

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • 3-jaw 10″ chuck, 12” face plate, steady rest
  • Removeable gap, back plate
  • Coolant system, American tool post
  • Full length splash guard
  • Center sleeves, dead center, tool kit
  • • wired 220V or 440V

Optional Accessories

  • 3-jaw 12″ chuck
  • 4-jaw 12″ chuck
  • Chuck guard
  • Tool guard (at front of compound slide with limit switch)
  • Lead screw cover (full length, accordion style)
  • Safety cover at end of spindle
  • UL or CSA electrical components,  UL spindle motor, CSA pump motor
Quote$
Get A Quote

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Request a Quote
Package
Connect With a Dealer

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Contact Sharp
Envelope
NEWSLetter

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Sign Up

Start typing and press enter to search

Scroll to Top