SH-1224-2A
| Table Size | 12 x 24 in. |
|---|---|
| Max Grind Size | 11 x 24 in. |
| Center Height | 20 in. |
| Spindle HP | 3 hp |
Overview
The model has automatic longitudinal and cross feed. It offers intermittent and continuous cross feed. The table and saddle both has double V ways. The NC spindle downfeed system is optional.
- 2-way auto (longitudinal and cross)
- Optional NC downfeed with ballscrew and servo feed
- 3 HP motor
- Spindle speed 1,720 rpm
- Extra wide bed
- Double longitudinal “V” ways and cross “V” ways
- Hydraulic table (w/ over travel protection) with pre-set functions
- Auto crossfeed (intermittent and continuous mode)
- Slide ways are hand scraped and TURCITE coated
Product Video
Features
Preset hydraulic table speed control
Preset hydraulic table speed control allows operator to pre-set table feed rate (6 fpm – 83 fpm) so one can have the same speed rate every time the hydraulic table is engaged.
The saddle rides on precision, hand scraped double V ways coated with TURCITE for better retaining of lube oil and minimize wear on the ways.
Extensive ribbing work table design
Extensive ribbing design of the work table allows heavy duty grinding, ensures no distortion of the table even under difficult grinding conditions.
Double V ways at the bottom of the work table allows precise longitudinal movement
during grinding.
The saddle is also equipped with double V ways to ensure precise movement of cross travel.
NC spindle downfeed system
Settings include : Zero setting, total depth, rough cut, fine cut and number of spark out. down feed speed, table stop at right or left.
Electronic handwheel (MPG) allows manual dialing for down feed operations.
Specs
Capacity | Inch | Metric |
|---|---|---|
| Max Distance : Table to Spindle Center | 20 in. | 500 mm |
Table | Inch | Metric |
|---|---|---|
| Table Size | 12 x 24 in. | 300 x 600 mm |
| Longitudinal Travel | 27.6 in. | 701 mm |
| Cross Travel | 14 in. | 355 mm |
Longitudinal Feed Of Table | Inch | Metric |
|---|---|---|
| Hand Feed Per Revolution | 0.1 in. | 2.54 mm |
| Hydraulic Feed | 6.6-82 ipm | 167.6 x 2,082.8 mm |
Cross Feed Of Saddle | Inch | Metric |
|---|---|---|
| Hand Feed Per Revolution | 0.1 in. | 4 mm |
| Hand Wheel Graduation | 0.0005 in | 0.02 mm |
| Intermittent Feed | 0.0039-0.39 in./feed | 0.1-10 mm/feed |
| Continuous Traverse Feed | 39.37 in./min | 1000 mm/min |
Vertical Feed of Wheel | Inch | Metric |
|---|---|---|
| Hand Feed Per Revolution | 0.05 in. | 1.27 mm |
| Hand Wheel Graduation | 0.0001 in. | 0.00254 mm |
| NC Down Feed | 18.9 ipm | 480.06 mm |
Motors | Inch | Metric |
|---|---|---|
| Spindle | 3 HP | 2.23 Kw |
General | Inch | Metric |
|---|---|---|
| Floor Area (W x H x L) | 6.4 x 6.13 x 5.91 ft. | 1.95 x 1.86 x 1.80 M |
| Approximate Weight | 4,000 lbs. | 1,814.3 Kg |
| Power Consumption (220V) | 5.4 KVA/25 amps | 5.4 KVA/25 amps |
| Power Consumption (440V) | 5.4 KVA/12.5 amps | 5.4 KVA/12.5 amps |
All specifications subject to change without notice. Please call to verify.
Accessories
Standard Accessories
- Coolant System (25 Gal.)
- Wheel Balancer
- Wheel Balancing Stand & Arbor
- Ballscrew on Cross Feed
- Electronic Crossfeed & Stroke Setting
- Wheel Flange
- Grinding Wheel 14” x 1.25“ x 5″(SH-920, SH-1224) 14″ x 1.5″ x 5″(SH-1632, SH-1640
- Auto Lube System
- Spindle head rapid up & down
- Wired 220V or 440V. Please specify
- Splash guard both front and back
Optional Accessories
- NC spindle down feed with touch screen, servo motor, ballscrew
- Auto parallel dresser
- 15HP Upgraded from 10HP
- Coolant System w/Paper Filter & Magnetic Separator (30 Gal)
- Parallel Dresser (Manual)
- Parallel Dresser (Semi-Automatic)
- Spare Wheel Adaptor (Flange)
- Radius and Angle Dresser
- Mist collection system
Related Products
You may also like…
-
Automatic Surface GrindersSG-618-2A
Table Size 6 x 18.3 in. Max Grind Size 5.9 x 19.7 in. Center Height 16 in. Spindle HP 2 hp -
Manual MachinesSG-618-2AN
WITH NC SPINDLE DOWNFEED
Table Size 6 x 18.3 in. Max Grind Size 5.9 x 19.7 in. Center Height 16 in. Spindle HP 2 hp -
Manual MachinesSG-820-2A
Table Size 8 x 20 in. Max Grind Size 8.7 x 21.7 in. Center Height 16 in. Spindle HP 2 hp -
Manual MachinesSG-820-2AN
WITH NC SPINDLE DOWNFEED
Table Size 8 x 20 in. Max Grind Size 8.7 x 21.7 in. Center Height 16 in. Spindle HP 2 hp -
Manual MachinesSH-920-2A
Table Size 9 x 20 in. Max Grind Size 11 x 26 in. Center Height 20 in. Spindle HP 3 hp -
Manual MachinesSH-1632-2A
Table Size 16 x 32 in. Max Grind Size 11 x 24 in. Center Height 24 in. Spindle HP 5 hp
Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.
Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.
Register to keep up to date with our monthly newsletter containing the latest information and specials.