> >

TMV

Long. Travel 39 in.
Cross Travel 16.3 in.
Taper, HP R-8, 3 hp
Slide Ways Box Ways
Spindle Variable Speed
Request a Quote
Download Brochure
Overview
Features
Specs
Accessories

Overview

This model is constructed with box ways instead of dove tail ways. The model has many unique features compared with most of the similar machines on the market.

The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed.

Tapered gibs installed on the ways allows easy adjustment for long term usage.

The feed handles are designed to spin free which eliminates the friction between the operator’s hand and the feed handle.

The bottom of the saddle, instead of the top of the knee ways,  which rides on the knee, is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.

  • 10 x 54 ins table, 16.3 x 39  ins  travel
  • R-8 spindle, 3 hp , variable speed (60-4,500 rpm)
  • Spindle runout of no more than 0.0002 ins TIR
  • Hardened and ground box ways, column, base
  • Head tilt side to side, up and down
  • One shot lubrication with back flow valve
  • Tapered gibs for adjustment

Features

Box Ways

Hardened and Ground box ways on the vertical column and base offer extra support under heavy cutting conditions.

Patented Knuckle Head design

The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)

Patented sliding vari disc movement

Easy Access Lubricating Shaft is designed with an oil channel in the center that is fed by a grease fitting at the lower end for longer motor shaft life. (Patent No. 2848)

Improved design of Backlash Eliminator

Backlash Eliminator By Double Nut Design replaces the older design that squeezes a split nut to get rid of backlash. Sharp is the first one to use a double nut design that keeps the feed screw in contact with a pair of bronze nuts. Using a custom tool supplied with the mill, the feed nuts are adjusted to control backlash and held tight with a retaining nut and locking ring.

Specs

Capacity Inch Metric
Table Size10 x 54 in. 254 x 1,371 mm
T-slots (No., Size, Pitch)3, 5/8, 2.5 in. 3, 16, 63.5 mm
Table Travel : X Longitudinal39 in. 990 mm
Table travel : Y Cross16.3 in.414 mm
Quill travel: Z Vertical 5 in. 127 mm
Ram Travel 18.5 in. 470 mm
Knee travel : Vertical15.3 in. 388 mm
Spindle Center to Column9.8 - 28.3 in. 248 - 718 mm
Spindle Nose to Table Top5.375 x 16.9 in. 136 - 429 mm
Head, Spindle Inch Metric
Spindle Nose TaperR-8
Spindle Variable Speed Range60-4500 rpm 60-4500 rpm
Spindle Motor (220V/440V)3 HP 2.25 KW
Quill Feed (Inch/Min)(3 speeds).0015, .003, .006 in..038, .076, .152 mm
Quill Diameter3.375 in. 85.7 mm
Head Tilt Angle (L/R)90°
Head Tilt Angle (Up/Down)45°
General Inch Metric
Floor Area (W x D x H)

9.83 x 6.25 x 7.64 ft.

2.99 x 1.9 x 2.32 M

Approximate Weight3,000 lbs. 1,360 Kg.
Power Consumption (220V)3 KVA/8 amps
Power Consumption (440V)3 KVA/4 amps

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • One Shot Lube System
  • Hard-Chromed Ways
  • Front and Rear Rubber Way Covers
  • Tool box with tools
  • Wired 220V or 440V.

Optional Accessories

  • Auto Lube Pump with 2 Adjustments
  • “Sharp” Power Table Feed with Safety Handle
  • “Sharp” Power Cross Feed with Safety Handle
  • “Sharp” Power Knee Feed with Safety Handle
  • 6 in. “Kurt” Vise with Swivel Base
  • Right Angle Milling Attachment with Arbor            
  • Drill Chuck & Drill Arbor                                      
  • 6 in. Riser Block                                                                  
  • Coolant System with Chip Pan (pump included
  • “Maxi Torque Rite” Power Draw Bar
  • Clamping Kit (52 pcs/Steel Rack)              
  • Halogen Work light
  • CE mark
  • 380V and 575V transformer  
  • UL components upgrade with electrical box
  • UL compliance certificate under State of California
  • Digital Readout System
Quote$
Get A Quote

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Request a Quote
Package
Connect With a Dealer

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Contact Sharp
Envelope
NEWSLetter

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Sign Up

Start typing and press enter to search

Scroll to Top