LMV-49-DVS-MP-2
| X Travel | 31 in. |
|---|---|
| Y Travel | 11 in. |
| Z Travel | 5 in. |
| Taper, HP | R-8, 3 hp |
| Spindle | Digital Variable Speed |
Overview
This is a simple, easy to use 2 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The Millpwr G2 CNC has G code and conversational type programming . The CNC system is built on the top quality SHARP vertical mills frame.
- 9 x 49” table, 11 x 31 x 5” travel, Digital Variable Speed
- AcuRite Millpwr G2 CNC 2 axes control (Longitudinal, Cross)
- G code and conversational type programming
- 2 axes precision ball screws
- Safety handwheels
- Auto lube system
- 3 axes Digital Readout System (table, saddle, quill)
Features
Millpwr G2 Turnkey CNC System w/Software and Hardware
Dimension Functions:
- ABS/INC, POLAR/CARTESIAN, INCH/METRIC.
Programming:
- PROGRAM IN/OUT, POSITION/DRILL, MILL LINES, MILL ARC, BLEND (CORNER RADIUS)
- HOLES (BOLT CIRCLE, RECTANGULAR ARRAY, RECTANGULAR FRAM, LINE),
- CIRCLE (POCKET, FRAM, RING), RECTANGLE (POCKET, FRAME, SLOT, FACING) 9,999 STEPS OF PROGRAM SIZE
Special Features:
- CUSTOM POCKETS, REPEAT, ROTATE, MIRROR IMAGE.
Run Options:
- SINGLE STEP, DRY RUN, GRAPHICS ONLY, MANUAL POSITIONING.
Calculator Functions:
- GEOMETRY, TRIG.
HARDWARE
Operator Console:
- EASY TO USE FORMAT. CONVERSATIONAL ENGLISH. THREE DIMENSIONAL HARD KEYS. 10” FLAT PANEL, COLOR LCD DISPLAY. REMOTE STOP/GO SWITCH.
Controller Cabinet:
- HEAVY DUTY ENCLOSURE MODULAR CONSTRUCTION, 1 GHz Intel Celeron MICROPROCESSOR.
- USB AND RS232 INTERFACE
- 1” HIGH RESOLUTION DISPLAY WITH 3 D GRAPHICS
- 115VAC – 20 AMPS
Specs
Capacity | Inch | Metric |
|---|---|---|
| Table Size | 9 x 49 in. | 230 x 1245 mm |
| T-slots (No., Size, Pitch) | 3, 5/8, 2.5 in. | 3, 16, 63.5 mm |
| Table Travel : X Longitudinal | 31 in. | 787 mm |
| Table travel : Y Cross | 11 in. | 279 mm |
| Quill travel: Z Vertical | 5 in. | 127 mm |
| Ram Travel | 12 in. | 304.8 mm |
| Knee travel : Vertical | 16 in. | 406 mm |
| Spindle Center to Column | 6.75 - 18.5 in. | 171 - 470 mm |
| Spindle Nose to Table Top | 2.125 - 18 in. | 3.1-457 mm |
Head, Spindle | Inch | Metric |
|---|---|---|
| Spindle Nose Taper | R-8 | R-8 |
| Spindle Variable Speed Range | 60 - 4500 rpm | 60 - 4500 rpm |
| Spindle Motor (220V/440V) | 3 HP | 2.25 KW |
Quill Feed (Inch/Rev)(3 speeds) | .0015, .003, .006 in. | .038, .076, .152 mm |
| Quill Diameter | 3.375 in. | 85.7 mm |
| Head Swivel Angle | 360° | 360° |
| Head Tilt Angle (L/R) | 45° | 45° |
| Head Tilt Angle (Up/Down) | 45° | 45° |
General | Inch | Metric |
|---|---|---|
| Floor Area (W x D x H) | 7 x 6.6 x 6.7 ft. | 7 x 6.5 x 6.7 ft. (2.1 x 2 x 2 M) |
| Approximate Weight | 2,200 lbs. | 2,500 lbs (1,000 Kg.) |
| Power Consumption (220V) | 3 KVA/15 amps | 3 KVA/15 amps |
| Power Consumption (440V) | 3 KVA/7.5 amps | 3 KVA/15 amps |
All specifications subject to change without notice. Please call to verify.
Accessories
Standard Accessories
- Millpwr G2 2-axis CNC system
- 2-axis ball screws and servo drives
- Auto lube system
- 3-axis Digital Readout system
- Cross Way cover
Optional Accessories
- Acu-Rite electrical edge finder
- 6” “Kurt” Vise with Swivel Base
- Drill chuck
- Sharp Power Kneel
- Coolant System with Chip Pan At Base
- Power Draw Bar
- R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16”
- Clamping Kit (52 pcs/steel rack)
- Halogen Work light
- Riser block 6
- 440 V transformer
- 4th axes Digital Readout System (on knee)
Related Products
You may also like…
-
2-Axis CNC Knee MillsLMV-MP-2
X Travel 25 in. Y Travel 11 in. Z Travel 5 in. Taper, HP R-8, 3 hp Spindle Variable Speed -
2-Axis CNC Knee MillsLMV-50-MP-2
X Travel 32 in. Y Travel 11 in. Z Travel 5 in. Taper, HP R-8, 3 hp Spindle Variable Speed -
2-Axis CNC Knee MillsTMV-MP-2
X Travel 31 in. Y Travel 15.5 in. Z Travel 5 in. Taper, HP R-8, 3 hp Spindle Variable Speed -
2-Axis CNC Knee MillsTMV-DVS-MP-2
X Travel 31 in. Y Travel 15.5 in. Z Travel 5 in. Taper, HP R-8, 3 hp Spindle Digital Variable Speed -
2-Axis CNC Knee MillsTMV-1-MP-2
X Travel 31 in. Y Travel 15.5 in. Z Travel 5 in. Taper, HP NT-40, 5 hp Spindle Variable Speed -
2-Axis CNC Knee MillsTMV-FC-2
X Travel 31 in. Y Travel 15.5 in. Z Travel 5 in. Taper, HP R-8, 3 hp Spindle Variable Speed
Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.
Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.
Register to keep up to date with our monthly newsletter containing the latest information and specials.