Bed type vertical mills are ideal for milling large work piece or heavy cutting on hard metals. The quill is fixed so it can withstand strong lateral forces. For this model, the entire vertical head moves up to 20” that enables deep drilling and boring operations. The large spindle with #50 taper can remove large amount of metals in one pass. Even though the geared vertical head is huge, it travels smoothly by cranking the eye level tri-lever handle.
- 15” x 67” table, 15” x 39” travel
- Vertical head travel 20”, fixed quill
- NST #50 taper spindle, 10 HP motor
- Hardened and ground box ways
- Fully ribbed castings on column, table and saddle to make it a rigid structure
- Double nut backlash eliminator
- Eye-level lever control for vertical head rapid traverse
Solid Construction, Box Way Design
High quality castings are used on base, column, saddle and table. They are stressed relieved to avoid any distortion. All sliding surfaces are hand scraped to ensure full bearing support. All reference surfaces and T slots are precision ground to exact tolerances
Honeycombed Ribbing on Column
The vertical column of a bed mill usually received most pressure during heavy duty milling operations. Honeycombed pattern ribbings enhance rigidity of the casting.
Double Nut Backlash Eliminator
Backlash on the screw increases after long term usages. The backlash eliminator can correct the situation by adjusting the double nuts instead of the old method of squeezing a split nut.
Eye-Level Tri-Lever Handle Vertical Head Movement
Despite the heavy duty vertical spindle head, it is easy to move the head up and down manually using the tri-lever handle for positioning or close milling jobs.
Well Organized Electric Panel
All relays, contactors, transformers, overload protections, safety disconnect switches and wires are clearly labelled for easy maintenance.
|Table Size||14.93 x 67 in.||379.2 x 1701.08 mm|
|T-slots (No.x Width x Pitch)||5 x 0.75 x 2.75 in.|
5 x 19.05 x 69.85 mm
|Table Travel : X Longitudinal||39.37 in.||1,000 mm|
|Table Travel : Y Cross||14.93 in.||379.22 mm|
|Vertical Head Travel||19.68 in.||499.87 mm|
|Spindle Center to Column||14.93 in.||379.22 mm|
|Spindle Nose to Table||3.93-23.62 in.||99.82-599.94 mm|
|Table Feeds, Rapids||Inch||Metric|
|Longitudinal Feeds (Variable)||1.12 - 39.37 ipm||26 -1000 mm/min.|
|Longitudinal Rapids||110 ipm||2,800 mm/min.|
|Cross Feeds (Variable)||1.12 - 39.37 ipm||26 -1,000 mm/min.|
|Cross Rapids||110 ipm||2,800 mm/min.|
|Spindle Taper||NST #50|
|Spindle Speeds||45-1500 rpm|
|Vertical Head Travel||19.68 in.||500 mm|
|Vertical Head Feeds|
|Vertical Spindle||5 HP||3.7 Kw|
|Table Feed and Rapid|
|Coolant System||0.125 HP||0.093 Kw|
|Floor Area (W x D x H)||10.5 x 6.56 x 7.90 ft.||3.2 x 1.9 x 2.4 M|
|Power Consumption (220V)||30 amps|
|Power Consumption (440V)||15 amps|
All specifications subject to change without notice. Please call to verify.
- Coolant system
- Auto lubrication system
- Draw-in bolt (1 pc)
- Tool box
- Wired 220V or 440V
- Power drawbar w/ foot pedal control
- 6 in. “KURT” vise with swivel base D688
- Halogen work light
- 30 in. travel in z axes in lieu of 20 in.