30-V-Series

Swing 30 in.
Center Distance 80, 120 & 160 in.
Bore, HP 4.125 in., D1-11, 15 hp
Spindle Speed 10 – 1,200 rpm (18)

Overview

The model heavy duty lathe has 4.125” spindle bore, D1-11 Camlock spindle head,19” wide bed and wide range of threading capacity. Coarse thread reaches ¼ “ TPI.

  • D1-11 camlock spindle
  • Clutch type geared head
  • 4.125″ spindle bore
  • 15 hp motor
  • 18 speeds (10-1,200 rpm)
  • Wide thread range (1/4 tpi – 84 tpi)
  • 19″ wide bed
  • Multiple leads thread indicator

Product Video

Features

  • 4.125” spindle bore , largest spindle in this size lathes. More choices for different diameter of materials to be machined.
  • All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining
  • High precision pair of matched angular contact bearings supporting the front end of head stock, and rolling bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions.
  • Wide range of feeds and threads. Selection done by “pull and lock” handles to avoid slipping in engagement of gears.

Spindle drive is designed with clutch for easy change of speeds

  • One piece casting bed instead of sheet metal connected legs ensure dampening of vibration and permanent straightness of the bed ways.
  • The carriage and cross slide ways are lubricated by push button knobs.
  • The removable gap increases the swing by an extra 8” to accommodate larger work pieces that are short in length
  • Jog button is equipped at headstock for easy engagement of gears before cutting

2 types of optional leadscrew covers

  • Accordion type – that wrapped around the leadsrew
  • Full coverage type – as shown in the photo that covers the entire front of the machine bed

Specs

Capacity3080V30120V30160V
Swing Over Bed24 in.
(609.6 mm)
30 in.
(762 mm)
30 in.
(762 mm)
Swing Over Cross Slide14.75 in.
(374.6 mm)
19.75 in.
(501.6 mm)
14.75 in.
(374.6 mm)
Swing Over Gap33 in.
(838.2 mm)
39 in.
(990.6 mm)
39 in.
(990.6 mm)
Distance Between Centers80 in.
(2,032 mm)
120 in.
(3,048 mm)
160 in.
(4,064 mm)
Headstock3080V30120V30160V
Spindle Speed10-1,200 rpm10-1,200 rpm10-1,200 rpm
No. of Spindle Speeds181818
Spindle NoseD1-11 camlock D1-11 camlock D1-11 camlock
Spindle Bore

4.125 in.

(104.6 mm)

4.125 in.

(104.6 mm)

4.125 in.

(104.6 mm)

Threads and Feeds

3080V30120V30160V

Threads, Number

0.25-84 in., 60 threads

(0.2-112 mm, 60)

0.25-84 in., 60 threads

(0.2-112 mm, 60)

0.25-84 in., 60 threads

(0.2-112 mm, 60)

Modular Threads, Number0.05-28 MP, 55 threads 0.05-28 MP, 55 threads 0.05-28 MP, 55 threads
Diametral Pitch Threads, Number1-240 DP, 55 threads1-240 DP, 55 threads1-240 DP, 55 threads
Longitudinal Feeds

0.0015-0.2 in./rev

(0.0381 mm/rev)

0.0015-0.2 in./rev

(0.0381 mm/rev)

0.0015-0.2 in./rev

(0.0381 mm/rev)

Cross Feeds

0.0006-0.16 in./rev

(0.0152-4.06 mm/rev)

0.0006-0.16 in./rev

(0.0152-4.06 mm/rev)

0.0006-0.16 in./rev

(0.0152-4.06 mm/rev)

Leadscrew Pitch, Diameter1.5 in./2 tpi1.5 in./2 tpi1.5 in./2 tpi
Carriage3080V30120V30160V
Cross Slide Travel14.75 in.
(374.6 mm)
14.75 in.
(374.6 mm)
14.75 in.
(374.6 mm)
Compound Travel9 in.
(228.6 mm)
9 in.
(228.6 mm)
9 in.
(228.6 mm)
Compound Width30.25 in.
(768.3 mm)
30.25 in.
(768.3 mm)
30.25 in.
(768.3 mm)
Bed3080V30120V30160V
Bed Width19 in.
(482.6 mm)
19 in.
(482.6 mm)
19 in.
(482.6 mm)
Tailstock3080V30120V30160V
Quill Diameter3.12 in.
(79.24 mm)
3.12 in.
(79.24 mm)
3.12 in.
(79.24 mm)
Quill Travel7.5 in.
(190.5 mm)
7.5 in.
(190.5 mm)
7.5 in.
(190.5 mm)
Quill Center TaperMT #5 MT #5MT #5
General3080V30120V30160V
Spindle Motor15 HP
(11.18 Kw)
15 HP
(11.18 Kw)
15 HP
(11.18 Kw)
Voltage220V/440V220V/440V220V/440V
Phase3 phase 3 phase 3 phase
Power Consumption (220 V)15 KVA/40 amps 15 KVA/40 amps 15 KVA/40 amps
Power Consumption (440 V)15 KVA/20 amps 15 KVA/20 amps 15 KVA/20 amps
Power Consumption (575V) 15 KVA/15 amps 15 KVA/15 amps 15 KVA/15 amps
Approximate Weight8,200 lbs.
(3,719.4 Kg)
8,200 lbs.
(3,719.4 Kg)
8,200 lbs.
(3,719.4 Kg)
Dimensions

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • Steady rest with roller jaws
  • Face plate 20″
  • Coolant system
  • Longitudinal carriage stop
  • Halogen work light
  • Tailstock with 2 speeds on quill
  • Wired 220V or 440V

Optional Accessories

  • Taper attachment
  • Roller jaw set (3 pcs) for steady rest
  • 3-jaw chuck 12″
  • 4-jaw chuck 16”
  • Follow rest
  • Quick change tool holder
  • Live center – (dual bearing) MT #5
  • Live center – MT #5
  • Micrometer carriage stop
  • Steady rest, 8-3/4′ – 13″, 11″ – 17″ ,14″ – 21″
  • 20 HP motor in lieu of 15 HP motor
  • Rear splash guard (80″ / 120″ / 160″ length) • CSA or UL electrical parts and wiring
  • Chuck guard with limit switch
  • Tool post guard
  • Spindle rear end cover
  • Lead screw cover

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top