60″ Large Swing

Swing 60 in.
Center Distance 60 – 315 in.
Spindle Bore 6, 9, 12 & 15 in.
Bed Width 24 in.

Overview

The big bore lathe is ideal for large pipe works in oil fields and big valves works. This series offers spindle bores up to 15” , center distance range from 60” to 315”. The machine bed is 24” wide. Double chucks are available for holding extra long and large work pieces.

  • Swing over bedways: 60″
  • Bet centers: 60″ – 315″
  • Spindle bore: 6″ standard, 9″, 12″, 15″, optional
  • Spindle motor: 30 HP, larger HP available
  • Bed width: 24″
  • Massive one- piece casting machine base

Product Video

Features

Customer's machine in use

  • Satisfied SHARP customer machining a large hook weighing 2,300 lbs on the SHARP Heavy Duty Big Bore lathe with a 50″ swing and a 160″ center and a 9″ Spindle bore.

Three points support headstock spindle

  • The headstock casting is designed with one ball bearing and two tapered roller bearings supporting the full length of the spindle shaft.
  • Spindle bore sizes are available in 6”, 9” and 12” , 15”
  • Gears and shafts are made from hardened and ground alloy steel, the spindle is made from forged, chrome alloy material.

Solid one piece casting base

  • The one piece casting bed is fully ribbed to prevent distortion under heavy cutting conditions. The base casting of the headstock is ribbed to withstand stress and distortion due to heavy machining conditions
  • The oversized 24” wide bedways are induction hardened and ground for long lasting accuracy.
  • An additional third bed way is provided on the front of the bed, giving extra support to the carriage during heavy cutting conditions

Double Chuck , Gear Box

  • The headstock can accommodate double chucks when necessary.
  • The fully enclosed quick change gear box allows easy change of wide range of inch, metric, MP and DP threads without exchanging gears.

Power Tailstock

  • Tailstock is equipped with a 2 step quill feed for ease of infeed. Large hand crank allows convenient positioning of tailstock.
  • For larger models, motorized quill feed and power drive tailstock units are available as options. (picture shows optional power driven tailstock unit

Specs

Capacity60120M60200M60240M60280M
Swing Over Bed59.8 in.
(1,518.9 mm)
59.8 in.
(1,518.9 mm)
59.8 in.
(1,518.9 mm)
59.8 in.
(1,518.9 mm)
Swing Over Cross Slide47.63 in.
(1,209.8 mm)
47.63 in.
(1,209.8 mm)
47.63 in.
(1,209.8 mm)
47.63 in.
(1,209.8 mm)
Swing Over Gap76.77 in.
(1,949.9 mm)
76.8 in.
(1,950.72 mm)
76.8 in.
(1,950.72 mm)
76.77 in.
(1,949.9 mm)
Distance Between Centers118 in.
(2,997.2 mm)
196.9 in.
(5,001.26 mm)
236 in.
(5,994.4 mm)
280 in.
(7,112 mm)
Headstock60120M60200M60240M60280M
Spindle Speed4-420 rpm 4-420 rpm 4-420 rpm 4-420 rpm
No. of Spindle Speeds16 steps 16 steps 16 steps 16 steps
Spindle NoseA2-11A2-11A2-11A2-11
Spindle Bore6 in.
(152.4 mm)
6 in.
(152.4 mm)
6 in.
(152.4 mm)
6 in.
(152.4 mm)
Threads and Feeds60120M60200M60240M60280M
Inch Threads, Number0.25-30 tpi, 700.25-30 tpi, 700.25-30 tpi, 700.25-30 tpi, 70
Metric Threads, Number1-120 mm, 621-120 mm, 621-120 mm, 621-120 mm, 62
Modular Threads, Number0.25-30 MP, 530.25-30 MP, 530.25-30 MP, 530.25-30 MP, 53
Diametral Pitch Threads, Number1-120 DP, 701-120 DP, 701-120 DP, 701-120 DP, 70
Longitudinal Feeds0.0028-0.34 in/rev
(0.0711-8.63 mm)
0.0028-0.34 in/rev
(0.0711-8.63 mm)
0.0028-0.34 in/rev
(0.0711-8.63 mm)
0.0028-0.34 in/rev
(0.0711-8.63 mm)
Cross Feeds0.0014-0.17 in/rev
(0.035-4.31 mm)
0.0014-0.17 in/rev
(0.035-4.31 mm)
0.0014-0.17 in/rev
(0.035-4.31 mm)
0.0014-0.17 in/rev
(0.035-4.31 mm)
Leadscrew Pitch, Diameter2 tpi, 2.36 in. 2 tpi, 2.36 in. 2 tpi, 2.36 in. 2 tpi, 2.36 in.
Carriage60120M60200M60240M60280M
Cross Slide Travel23.6 in.
(599.44 mm)
23.6 in.
(599.44 mm)
23.6 in.
(599.44 mm)
23.6 in.
(599.44 mm)
Compound Travel14.57 in.
(370.07 mm)
14.57 in.
(370.07 mm)
14.57 in.
(370.07 mm)
14.57 in.
(370.07 mm)
Compound Width31.5 in.
(800.1 mm)
31.5 in.
(800.1 mm)
31.5 in.
(800.1 mm)
31.5 in.
(800.1 mm)
Bed60120M60200M60240M60280M
Bed Length 195 in.
(4,953 mm)
272 in.
(6,908.8 mm)
313 in.
(7,950.2 mm)
352.4 in.
(8,950.96 mm)
Bed Width24 in.
(609.6 mm)
24 in.
(609.6 mm)
24 in.
(609.6 mm)
24 in.
(609.6 mm)
Tailstock60120M60200M60240M60280M
Quill Diameter4.92 in.
(124.96 mm)
4.92 in.
(124.96 mm)
4.92 in.
(124.96 mm)
4.92 in.
(124.96 mm)
Quill Travel11.6 in.
(294.64 mm)
11.8 in.
(299.72 mm)
11.8 in.
(299.72 mm)
11.8 in.
(299.72 mm)
Quill Center TaperMT #6 MT #6 MT #6 MT #6
General60120M60200M60240M60280M
Spindle Motor30 HP
(22.37 Kw)
30 HP
(22.37 Kw)
30 HP
(22.37 Kw)
30 HP
(22.37 Kw)
Approximate Weight23,628 lbs.
(10,717.4 Kg)
28,030 lbs.
(12,714 Kg)
30,228 lbs.
(13,711 Kg)
32,428 lbs.
(14,709.09 Kg)
Dimensions16.91x6.72x5.72 ft
(5.15x2.04x1.74 M)
23.45x6.72x5.70 ft
(7.14x2.04x1.74 M)
26.75x6.72x5.70 ft
(8.15x2.04x1.74 M)
30x6.72x5.70 ft.
(9.14x2.04x1.74 M)

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • 16 Spindle speed
  • 2 stage spindle start up
  • Headstock oil bath system
  • Electro magnetic brake
  • Lubrication system
  • Coolant system
  • Manual tailstock
  • Steady rest 16”
  • Work lamp

Optional Accessories

  • 3 jaw chuck, different sizes
  • 4 jaw chuck, different sizes
  • Steady rest, larger sizes
  • Follow rest, different sizes
  • Face plate with 4 jaws, different sizes
  • Rear chuck adapter
  • 40 HP, 50 HP in lieu of 30 HP motor
  • Taper Attachment
  • Digital Readout System

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top