Overview

This is a semi automatic miter saw for straight and angle cut from 90° to 45° (backwards). The swivel bed miter cutting design are great for structural steel processing, such as pipe, H beam, channel, angle and bar stock, without swinging the material. Hydraulic system controls the down feed rate and cutting pressure.

  • 10″ round, 10″ x 10″ square, 9″ x 15.7″ rectangle maximum cutting capacity (90°)
  • 7.5″ round, 6.9″ x 6.9″ square, 6″ x 8″ rectangle maximum cutting capacity (45°)
  • Saw blade has 4 running speeds. (95, 150, 213, 321 fpm)
  • It has manual blade tension adjustment
  • 2 HP motor powers the cutting operation
  • Manual vise control
  • 1/4 HP hydraulic system operates through the control panel
  • The saw feed rate may be adjusted by setting the dial between 0 and 10 via the hydraulic down feed valve. This large adjustment range allows proper settings to achieve shorter cutting time, longer blade life and better finishes
  • Built-in coolant system
  • Machine weight around 1,400 lbs

Features

additional features

  • Heavy duty cast iron swivel center features straight and miter cuts from 90 degree to 45 degree (backwards) with quick setting and precise positioning
  • The large easy-to-read mitering scale enable smooth turning of the saw arm for each angle.
  • Carbide blade guides with roller bearings pre-align the blade before entering carbide blade guides. It reduces wear on blade guides and blade, thus enhancing blade life
  • The two blade guides located on a central axis support the blade from the top, giving it extra penetrating force. The carbide guides are relieved to allow coolant flow to lubricate and cool the blade as well as work piece
  • The blade guide arms are mounted on an extra wide precision ground dovetail slide for more solid and supportive surface. This rigid design reduces vibration and achieves better cutting result
  • The blade is equipped with blade brush to remove chips from blade gullet
  • The hydraulic system operates through the control panel offers the convenience of raising the saw head automatically after cut-off
  • Work height selector is used to adjust the blade to minimum clearance height over the stock
  • Cast iron vises are equipped with replaceable extension plate
  • Manual vise clamping is done through a manual leadscrew with anti-slip hand wheel
  • Manually adjustable material stop to set cutting length
  • Bi-metal material saw blade for long lasting operation

Specs

Maximum Cutting Capicity

90° Angle

45° Angle

30° Angle

Round

10"

(250 mm)

7.5"

(190 mm)

8.7"

(220 mm)

Square

10" x 10"

(250 x 250 mm)

6.9" x 6.9"

(175 x 175 mm)

8.7"

(220 mm)

Rectangle (H x W)

9" x 15.7"

(230 x 400 mm)

6" x 8"

(155 x 205 mm)

8.7 x 8.8

(220 x 240 mm)

Saw Blade

90° Angle

45° Angle

30° Angle

Speed

60Hz - 95, 150, 213, 321 fpm

(29, 46, 65, 98 m/min)

60Hz - 95, 150, 213, 321 fpm

(29, 46, 65, 98 m/min)

60Hz - 95, 150, 213, 321 fpm

(29, 46, 65, 98 m/min)

Size

1" x .035 x 132"

(25 x 0.9 x 3,353 mm)

1" x .035 x 132"

(25 x 0.9 x 3,353 mm)

1" x .035 x 132"

(25 x 0.9 x 3,353 mm)

TensionManualManualManual
Motor Output

90° Angle

45° Angle

30° Angle

Saw Blade

2 HP

(1.5 kW)

2 HP

(1.5 kW)

2 HP

(1.5 kW)

Hydraulic

1/4 HP

(0.2 kW)

1/4 HP

(0.2 kW)

1/4 HP

(0.2 kW)

Coolant

1/8 HP

(0.1 kW)

1/8 HP

(0.1 kW)

1/8 HP

(0.1 kW)

General

90° Angle

45° Angle

30° Angle

Table Height

25 in.

(630 mm)

25 in.

(630 mm)

25 in.

(630 mm)

Net Weight

1,188 lb

(540 kg)


1,188 lb

(540 kg)

1,188 lb

(540 kg)

Gross Weight

1,408 lb

(640 kg)


1,408 lb

(640 kg)


1,408 lb

(640 kg)


Floor Space (L x W x H)

67" x 43.5" x 55.5"

(1,700 x 1,100 x 1,400 mm)

67" x 43.5" x 55.5"

(1,700 x 1,100 x 1,400 mm)

67" x 43.5" x 55.5"

(1,700 x 1,100 x 1,400 mm)

Accessories

Standard Accessories

  • Easy blade change with front access at wait level
  • Adjustable mechanical material stop
  • Bi-Metal saw blade
  • Coolant system
  • Tools leveling pads and additional wire brush

Optional Accessories

  • Infinite variable speed device
  • 2M roller table
  • 1M roller table

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top