3080TC-F
| Swing | 30 in. |
|---|---|
| Centers | 78.75 in. |
| Bore, HP | 6.7 in., D1-11, 20 hp |
Overview
This is a user friendly CNC lathe with full CNC functions and manual operation functions. It has programmable spindle speed, and 4- way tool post positioning. The Electronic handwheel (MPG) can be used for manual operation.
- FANUC Oi-TF CNC , 10.4” LCD screen
- 30” swing, 79” between centers (3080 Oi-TF)
- A2-11 , 6.7” spindle bore,
- 20 HP motor
- 2 steps gear speed change (10-1,000 rpm)
- programmable spindle speed
- Electronic Handwheel (MPG)
- 8 positions hydraulic turret ( 4 internal, 4 external)
- Auto lube system
Features
3000-Series Features
- Operate as manual lathe with electronic handwheels,
- Operate as a full CNC lathe with programmable speed, using M code or G code language,
- Operate semi automatically, combining manual and CNC operations
- A2-11 spindle, 6.7” spindle bore
- Geared head with 2 steps speed change, Automatic speed change
- Inch/Meter threading Left or right-hand threading, single or multiple-start threading
The Fanuc OiTF all digital control and drive package provides exceptional value and reliability. The control features a clear 10.4” LCD screen that pivots out of easy operator viewing. It can catalog 400 part-program numbers and features an internal 2 GB solid state Data Server with 512 K RAM memory reserved for part programs. It features an embedded high speed Ethernet capability and AICC II and includes DB-25, RS-232 serial interface, RJ-45 Ethernet interface USB, and PC MCIA CF memory card connections for program transfer. Manual Guide-i conversational programming provides fast & efficient intuitive menu driven shop floor programming and includes a Thread Repair Cycle. An MPG handwheel is also provided.
Selected functions:
- Chuck & tailstock barrier
- Chamfering on/off
- Exact stop mode or one-time
- Work shifts G 52-G59
- Programmable parameters
- Canned cycles
- Rigid tapping
- Constant surface speed control
- Direct input of offset value measured
- Stored stroke check 1, 2 & 3
- Chamfering and corner radius
- Multi & continuous threading
- DBC operation with memory card
- Sub program call
- Direct input of coordinate system shift
- 64 offset pairs
- Mirror image
- Program & sequence # search
- Variable lead thread cutting
- Customer macros
- Circular interpolation by R programming
- Spindle speed override
- Tool nose radius compensation
- DNC operation from memory card
- Multiple repetitive canned cycles 1 & 2
Specs
Capacity | Inch | Metric |
|---|---|---|
| Swing Over Bed | 29.92 in. | 760 mm |
| Swing Over Cross Slide | 19 in. | 480 mm |
| Turing diameter (in front of cross slide with 8-station turret turning tool) : | 22 in. | 558.8 mm |
| Distance between centers | 78.75 in. | 2,000 mm |
| Width of Bed | 18 in. | 460 mm |
| Length of Bed | 137.75 in. | 3,500 mm |
| Center height | 15 in. ) | 380 mm |
| Bed Casting Height | 15.75 in. | 400 mm |
| Bed way | one flat and V | one flat and V |
| Bed way of cross slide | Dovetail slide way | Dovetail slide way |
Headstock | Inch | Metric |
|---|---|---|
| Spindle bore | 6.7 in. | 170 mm |
| Spindle nose | A2-11 | A2-11 |
| Range of spindle speed | 10-1,000 rpm | 10-1,000 rpm |
| No. of spindle speed | 2 steps/ auto selected gear ranges | 2 steps/ auto selected gear ranges |
TRAVEL | Inch | Metric |
|---|---|---|
| X-axis cross slide travel | 19.68 in. | 500 mm |
| Z-axis travel longitudinal travel | 78.75 in. | 2,000 mm |
| X-axis ball screw diameter | 1.25 in. | 32 mm |
| Z-axis ball screw diameter: | 1.96 in. | 50 mm |
Feed | Inch | Metric |
|---|---|---|
| X/Z-axis rapid feed | 1,394 ipm | 10,000 mm/min |
| X/Z-axis cutting feed rate | 118.11 ipm | 3,000 mm/min |
| Turret | Hydraulic 8 position turret LS 200 with 4 X internal tool holder and 4 X external tool wedges | Hydraulic 8 position turret LS 200 with 4 X internal tool holder and 4 X external tool wedges |
| Tool shank/Number | 1 x 1 in. | 25.4 mm x 25.4 mm |
| Boring bar diameter | 1.5 in. | 38.1mm |
Tailstock | Inch | Metric |
|---|---|---|
| Quill diameter | 5 in. | 125 mm |
| Quill travel | 7.87 in. | 200 mm |
| Taper of center | MT6 | MT6 |
Motor | Inch | Metric |
|---|---|---|
| Spindle motor | 20 HP | 14.91 kw |
| X-axis servo motor | 2 HP | 1.6 kw |
| Z-axis servo motor | 4 HP | 3 kw |
| Hydraulic Pump motor | 2 HP | 1.5 kw |
| Coolant pump | 0.75 HP | 0.55 kw |
| Power consumption | 28 KVA | 28 KVA |
Dimensions | Inch | Metric |
|---|---|---|
| Net Weight | 10,120 lbs. | 4,590 kg |
| Machine dimensions | 15.41 x 6.56 x 5.91 ft. | 4.69 x 1.99 x 1.80 M |
All specifications subject to change without notice. Please call to verify.
Accessories
Standard Accessories
- Flat belt type chip conveyor
- Full enclosure splash guard
- 16” 3 jaw chuck
- Air assist manual tailstock
- Stead rest (3”-8”)
- High pressure coolant system
- Rear chuck guard
- Electrical box to suit CNC Turning Control
- 8 positions turret programmable tool post (4 internal, 4 external)
- Incandescent Work Lamp
- Electronic handwheel (MPG) X & Y Axis
Optional Accessories
- Transformer (28 KVA) $
- Steady rest with bearing (grip range
- Follow up rest (0.4” – 5.5”)
- Follow up rest (10”- 18”)
- Hydraulic tailstock with foot padel in lieu of manual tailstock
- Boring attachment
- 20” 3 jaw chuck, A2-15 with back plate
- 10” bore in lieu of 6.5” bore
- 20” 3-jaw chuck A2-15, 255 mm through hole with back plate
- Spindle chiller
Related Products
You may also like…
Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.
Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.
Register to keep up to date with our monthly newsletter containing the latest information and specials.