30-V-Series
| Swing | 30 in. |
|---|---|
| Center Distance | 80, 120 & 160 in. |
| Bore, HP | 4.125 in., D1-11, 15 hp |
| Spindle Speed | 10 – 1,200 rpm (18) |
Overview
The model heavy duty lathe has 4.125” spindle bore, D1-11 Camlock spindle head,19” wide bed and wide range of threading capacity. Coarse thread reaches ¼ “ TPI.
- D1-11 camlock spindle
- Clutch type geared head
- 4.125″ spindle bore
- 15 hp motor
- 18 speeds (10-1,200 rpm)
- Wide thread range (1/4 tpi – 84 tpi)
- 19″ wide bed
- Multiple leads thread indicator
Product Video
Features
- 4.125” spindle bore , largest spindle in this size lathes. More choices for different diameter of materials to be machined.
- All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining
- High precision pair of matched angular contact bearings supporting the front end of head stock, and rolling bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions.
- Wide range of feeds and threads. Selection done by “pull and lock” handles to avoid slipping in engagement of gears.
Spindle drive is designed with clutch for easy change of speeds
- One piece casting bed instead of sheet metal connected legs ensure dampening of vibration and permanent straightness of the bed ways.
- The carriage and cross slide ways are lubricated by push button knobs.
- The removable gap increases the swing by an extra 8” to accommodate larger work pieces that are short in length
- Jog button is equipped at headstock for easy engagement of gears before cutting
2 types of optional leadscrew covers
- Accordion type – that wrapped around the leadsrew
- Full coverage type – as shown in the photo that covers the entire front of the machine bed
Specs
| Capacity | 3080V | 30120V | 30160V |
|---|---|---|---|
| Swing Over Bed | 24 in. (609.6 mm) | 30 in. (762 mm) | 30 in. (762 mm) |
| Swing Over Cross Slide | 14.75 in. (374.6 mm) | 19.75 in. (501.6 mm) | 14.75 in. (374.6 mm) |
| Swing Over Gap | 33 in. (838.2 mm) | 39 in. (990.6 mm) | 39 in. (990.6 mm) |
| Distance Between Centers | 80 in. (2,032 mm) | 120 in. (3,048 mm) | 160 in. (4,064 mm) |
| Headstock | 3080V | 30120V | 30160V |
|---|---|---|---|
| Spindle Speed | 10-1,200 rpm | 10-1,200 rpm | 10-1,200 rpm |
| No. of Spindle Speeds | 18 | 18 | 18 |
| Spindle Nose | D1-11 camlock | D1-11 camlock | D1-11 camlock |
| Spindle Bore | 4.125 in. (104.6 mm) | 4.125 in. (104.6 mm) | 4.125 in. (104.6 mm) |
Threads and Feeds | 3080V | 30120V | 30160V |
|---|---|---|---|
Threads, Number | 0.25-84 in., 60 threads (0.2-112 mm, 60) | 0.25-84 in., 60 threads (0.2-112 mm, 60) | 0.25-84 in., 60 threads (0.2-112 mm, 60) |
| Modular Threads, Number | 0.05-28 MP, 55 threads | 0.05-28 MP, 55 threads | 0.05-28 MP, 55 threads |
| Diametral Pitch Threads, Number | 1-240 DP, 55 threads | 1-240 DP, 55 threads | 1-240 DP, 55 threads |
| Longitudinal Feeds | 0.0015-0.2 in./rev (0.0381 mm/rev) | 0.0015-0.2 in./rev (0.0381 mm/rev) | 0.0015-0.2 in./rev (0.0381 mm/rev) |
| Cross Feeds | 0.0006-0.16 in./rev (0.0152-4.06 mm/rev) | 0.0006-0.16 in./rev (0.0152-4.06 mm/rev) | 0.0006-0.16 in./rev (0.0152-4.06 mm/rev) |
| Leadscrew Pitch, Diameter | 1.5 in./2 tpi | 1.5 in./2 tpi | 1.5 in./2 tpi |
| Carriage | 3080V | 30120V | 30160V |
|---|---|---|---|
| Cross Slide Travel | 14.75 in. (374.6 mm) | 14.75 in. (374.6 mm) | 14.75 in. (374.6 mm) |
| Compound Travel | 9 in. (228.6 mm) | 9 in. (228.6 mm) | 9 in. (228.6 mm) |
| Compound Width | 30.25 in. (768.3 mm) | 30.25 in. (768.3 mm) | 30.25 in. (768.3 mm) |
| Bed | 3080V | 30120V | 30160V |
|---|---|---|---|
| Bed Width | 19 in. (482.6 mm) | 19 in. (482.6 mm) | 19 in. (482.6 mm) |
| Tailstock | 3080V | 30120V | 30160V |
|---|---|---|---|
| Quill Diameter | 3.12 in. (79.24 mm) | 3.12 in. (79.24 mm) | 3.12 in. (79.24 mm) |
| Quill Travel | 7.5 in. (190.5 mm) | 7.5 in. (190.5 mm) | 7.5 in. (190.5 mm) |
| Quill Center Taper | MT #5 | MT #5 | MT #5 |
| General | 3080V | 30120V | 30160V |
|---|---|---|---|
| Spindle Motor | 15 HP (11.18 Kw) | 15 HP (11.18 Kw) | 15 HP (11.18 Kw) |
| Voltage | 220V/440V | 220V/440V | 220V/440V |
| Phase | 3 phase | 3 phase | 3 phase |
| Power Consumption (220 V) | 15 KVA/40 amps | 15 KVA/40 amps | 15 KVA/40 amps |
| Power Consumption (440 V) | 15 KVA/20 amps | 15 KVA/20 amps | 15 KVA/20 amps |
| Power Consumption (575V) | 15 KVA/15 amps | 15 KVA/15 amps | 15 KVA/15 amps |
| Approximate Weight | 8,200 lbs. (3,719.4 Kg) | 8,200 lbs. (3,719.4 Kg) | 8,200 lbs. (3,719.4 Kg) |
| Dimensions |
All specifications subject to change without notice. Please call to verify.
Accessories
Standard Accessories
- Steady rest with roller jaws
- Face plate 20″
- Coolant system
- Longitudinal carriage stop
- Halogen work light
- Tailstock with 2 speeds on quill
- Wired 220V or 440V
Optional Accessories
- Taper attachment
- Roller jaw set (3 pcs) for steady rest
- 3-jaw chuck 12″
- 4-jaw chuck 16”
- Follow rest
- Quick change tool holder
- Live center – (dual bearing) MT #5
- Live center – MT #5
- Micrometer carriage stop
- Steady rest, 8-3/4′ – 13″, 11″ – 17″ ,14″ – 21″
- 20 HP motor in lieu of 15 HP motor
- Rear splash guard (80″ / 120″ / 160″ length) • CSA or UL electrical parts and wiring
- Chuck guard with limit switch
- Tool post guard
- Spindle rear end cover
- Lead screw cover
Related Products
You may also like…
-
Heavy Duty Lathes22-B-Series
Swing 22 in. Center Distance 40, 60, 80, 100, 120, 160 in. Bore, HP 4.5 in., D1-11, 15 hp Spindle Speed 10 – 1,000 rpm (12) -
Heavy Duty Lathes
26-B-Series
Swing 26 in. Center Distance 40, 60, 80, 100, 120, 160 in. Bore, HP 4.5 in., D1-11, 15 hp Spindle Speed 10 – 1,000 rpm (12) -
Heavy Duty Lathes
30-B-Series
Swing 30 in. Center Distance 40, 60, 80, 100, 120, 160 in. Bore, HP 4.5 in., D1-11, 15 hp Spindle Speed 10 – 1,000 rpm (12) -
Heavy Duty Lathes24-V-Series
Swing 24 in. Center Distance 80, 120 & 160 in. Bore, HP 4.125 in., D1-11, 15 hp Spindle Speed 10 – 1,200 rpm (18)
Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.
Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.
Register to keep up to date with our monthly newsletter containing the latest information and specials.