TMV-MP-3-Series

Models: TMV-MP3, TMV-1 MP3, TMV-DVS MP3
X Travel31 in.
Y Travel15.5 in.
Z Travel5 in.
Taper, HPR-8 & NT-40, 3 hp

Overview

This is a simple, easy to use 3 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The Millpwr G2 CNC has G code and conversational type programming . The CNC system is built on the top quality SHARP vertical mills Model TMV and TMV-1 frame.

  • (TMV-MP3)10 x 54” table, 15.5 x 31x 5” travel, vari speed 3 HP, R-8 spindle
  • (TMV-DVS-MP3) 10 x 54” table, 15.5 x 31x 5” travel, Digital Vari Speed 3 HP, R-8 spindle
  • (TMV-1-MP3) 10 x 54” table, 15.5 x 31 x 5” travel, vari speed, 5 HP, #40 spindle
  • AcuRite Millpwr G2 CNC 3 axes control (Longitudinal, Cross)
  • G code and conversational type programming
  • 3 axes precision ball screws
  • Safety handwheels
  • Auto lube system
  • 3 axes Digital Readout System (table, saddle, quill)

Features

Millpwr G2 Turnkey CNC System w/Software and Hardware

Dimension Functions:

  • ABS/INC, POLAR/CARTESIAN, INCH/METRIC.

Programming:

  • PROGRAM IN/OUT, POSITION/DRILL, MILL LINES, MILL ARC, BLEND (CORNER RADIUS)
  • HOLES (BOLT CIRCLE, RECTANGULAR ARRAY, RECTANGULAR FRAM, LINE),
  • CIRCLE (POCKET, FRAM, RING), RECTANGLE (POCKET, FRAME, SLOT, FACING) 9,999 STEPS OF PROGRAM SIZE

Special Features:

  • CUSTOM POCKETS, REPEAT, ROTATE, MIRROR IMAGE.

Run Options:

  • SINGLE STEP, DRY RUN, GRAPHICS ONLY, MANUAL POSITIONING.

Calculator Functions:

  • GEOMETRY, TRIG.

HARDWARE

Operator Console:

  • EASY TO USE FORMAT. CONVERSATIONAL ENGLISH.  THREE DIMENSIONAL HARD KEYS.  10” FLAT PANEL, COLOR LCD DISPLAY.  REMOTE STOP/GO SWITCH.

Controller Cabinet:

  • HEAVY DUTY ENCLOSURE MODULAR CONSTRUCTION, 1 GHz Intel Celeron MICROPROCESSOR.
  • USB AND RS232 INTERFACE
  • 1” HIGH RESOLUTION DISPLAY WITH 3 D GRAPHICS
  • 115VAC – 20 AMPS

Specs / Models

CapacityTMV-MP3TMV-1 MP3TMV-DVS MP3
Table Size10 x 50 in. (254 x 1270 mm)10 x 50 in. (254 x 1270 mm)10 x 50 in. (254 x 1270 mm)
T-slots (No., Size, Pitch)3, 5/8, 2.5 in. (3, 16, 63.5 mm)3, 5/8, 2.5 in. (3, 16, 63.5 mm)3, 5/8, 2.5 in. (3, 16, 63.5 mm)
Table Travel : X Longitudinal31 in (787 mm)31 in (787 mm)31 in (787 mm)
Table travel : Y Cross15.5 in. ( 393 mm)15.5 in. ( 393 mm)15.5 in. ( 393 mm)
Quill travel: Z Vertical5 in. (127 mm)5 in. (127 mm)5 in. (127 mm)
Ram Travel18.5 in. (470 mm)18.5 in. (470 mm)18.5 in. (470 mm)
Knee travel : Vertical15.3 in. (388.62 mm)15.3 in. (388.62 mm)15.3 in. (388.62 mm)
Spindle Center to Column9.8-28.3 in. (250-720 mm)9.8-28.3 in. (250-720 mm)9.8-28.3 in. (250-720 mm)
Spindle Nose to Table Top1.6-16.9 in. (40.64-429.26 mm)1.6-16.9 in. (40.64-429.26 mm)1.6-16.9 in. (40.64-429.26 mm)
Head, SpindleTMV-MP3TMV-1 MP3TMV-DVS MP3
Spindle Nose TaperR-8NT-40R-8
Spindle Variable Speed Range60-4500 rpm60-4500 rpm60-4500 rpm Digital Variable Speed
Spindle Motor (220V/440V)3 HP (2.25 KW)5 HP (3.72 Kw)3 HP (2.25 KW)
Quill Feed (Inch/Min)(3 speeds)0.0015, 0.003, 0.005 in. (0.0381, 0.0762, 0.127 mm)0.0015, 0.003, 0.005 in. (0.0381, 0.0762, 0.127 mm)0.0015, 0.003, 0.005 in. (0.0381, 0.0762, 0.127 mm)
Head Tilt Angle (L/R)90°90°90°
Head Tilt Angle (Up/Down)45°45°45°
GeneralTMV-MP3TMV-1 MP3TMV-DVS MP3
Floor Area (W x D x H)7.08 x 6.66 x 7.5 ft. (2.15 x 2.02 x 2.28 M)7.08 x 6.66 x 7.5 ft. (2.15 x 2.02 x 2.28 M)7.08 x 6.66 x 7.5 ft. (2.15 x 2.02 x 2.28 M)
Approximate Weight3500 lbs. (1587 kg)3750 lbs. (1701 kg)3500 lbs. (1587 kg)
Power Consumption (220V)3 KVA/15 amps5 KVA/25 amps3 KVA/15 amps
Power Consumption (440V)3 KVA/7.5 amps5 KVA/12.5 amps3 KVA/7.5 amps

Accessories

Standard Accessories

  • Millpwr G2 3 axes CNC system
  • 3 axes ball screws and servo drives
  • Auto lube system
  • 3 axes Digital Readout system
  • Cross Way cover

Optional Accessories

  • NT#30 SPINDLE IN LIEU OF NT#40
  • Acu-Rite electrical edge finder
  • 6” “Kurt” Vise with Swivel Base
  • Drill chuck 
  • Sharp Power Kneel
  • Coolant System with Chip Pan At Base
  • Power Draw Bar                         
  • R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16”
  • Clamping Kit (52 pcs/steel rack)
  • Halogen Work light
  • Riser block 6
  • 440 V transformer
  • 4th axes Digital Readout System (on knee)

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top