• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Box Way Vertical Machining Centers

The Sharp SV-2517 box way series of compact vertical machining centers are engineered to have unsurpassed quality and outperform all other machines in its category. All of our vertical machining centers structural components are made of Meehanite castings with internal ribs running throughout each section. Each axis is driven by a high precision pre-tensioned double anchored ball screw that is centered between the guide ways. All structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy.





  • 25” x 17” x 18” travel
  • Hardened and ground Box ways with TURCITE coating
  • 8,000 rpm, CAT 40 spindle
  • 16 tools carousel type ATC
  • Fanuc Oi-MF control panel with embedded Ethernet, RS232 port, USB port and Flash Drive port. (standard)
  • Pre-tensioned, double anchored, ball screws mounted on high precision angular contact bearings (ABEC 7), eliminate chatter and vibrations during heavy cutting.
  • Vertical head is equipped with 2 adjustable coolant nozzles, one adjustable air nozzle,  4 coolant openings and 4 air curtain openings under the spindle. There is also the air purge system that blows out chips at each tool change (standard)
  • Chip wash nozzles are installed at each side of machine base (standard)
  • Rigid taping, auto lube, thermal control system, coolant gun, air gun, interlock doors (standard)
  • Machine wt. 8,200 lbs


Box Way Vertical Machining Center SV-2517S-F SV-2517SE-F SV-2517SZ-F
Work Capacity
Travel X,Y,Z      25.2" x 17.1" x 18.1" (S-F , SE-F)                                         25.2"x17.1"x23.6" (SZ-F)           
Spindle Nose to Table                    3.1 - 21.2 (S-F, SE-F)                                           3.9" - 27.6" (SZ-F)
Spindle Center to Column                                                 19.3 (490 mm)
Work Table
Table Area                                   27.5" x 16.5" (700mm x 420mm)
Spindle Taper                                                CAT 40
Spindle Max. Speed                                                8,000 rpm
Driving Type                                                Belt Drive
Motor (30m/cont.)                                    10 / 15 HP  (7.5 / 11 kw)
Automatic Tool Changer (ATC)
Magazine type Carousel Armless Armless
Magazine Capacity 16 24 24
Max. Tool Diameter 2.9" (75mm) 3.9" (120mm) 3.9" (120 mm)
w/o adj. tool, max dia. 5.9" (150mm) 5.9" (150mm) 5.9" (150mm)
Max Tool Length 11.8" (300mm) 9.8" (250mm) 9.8" (250mm)
Max Tool Weight 15.4 lbs (7kg) 15.4 lbs (7kg) 15.4 lbs (7kg)
Air Blast at Tool Change Standard                                     standard                                    standard
Cutting Feed Rate                                     0.04 - 393.7 ipm (1-10,000 mm/m)
Rapid Traverse                                  X / Y / Z: 787 ipm (20,000 mm/m)
Positioning Accuracy                                       0.00016 " (0.004 mm)
Repeatability Accuracy                                       0.00012 " (0.003 mm)
CNC Control Features
Controller                                                    Fanuc Oi-MF
Programming Assist                                                    Manual Guide
4th Axis Support Standard Standard Standard
Screen Size 8.4 LCD                        8.4 LCD                       8.4 LCD
Coolant System
Flood Coolant Nozzles

   2                                      2                                   2

Coolant Tank Capacity                                                    42 gal. (160 L)
Chip Pan                                                     Standard
Power Requirement
Electrical                                      220V/3 Phase/20 KVA/60 Hz
Air                                                   6 CFM @ 88 psi
Machine Measurements
Floor Space                        W: 80" (2,020 mm), D: 87"(2,200mm)
Height                                                   99" (2,525 mm)
Door Opening                                                   28.4" (720 mm)
Weight                                                    8,200 lbs (3,720 kg)


  • Fanuc Oi-mate-MF control and drives with ; USB port, 512 K memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power Off
  • Full metal enclosure with 2 large side doors
  • Coolant system with enlarged coolant tank
  • Coolant gun
  • Auto lubrication system
  • Rigid tapping
  • Air gun
  • Removable electronic hand wheel (MPG)
  • Door interlock
  • Chip pan
  • Air accumulator
  • Heat exchanger for electric cabinet
  • Florescent work light


  • 4th axis software from Fanuc
  • 4th axis kit prepped ( electrics, cables unit)
  • 4th axis with rotary table (complete with drives, motor)
  • Scrapper type chip conveyor
  • Hinge type chip conveyor
  • Oil skimmer
  • Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
  • CTS 20 bar/70 bar (300/1,000 psi) pump with tank
  • Tool Probe (Renishaw TS27R)
  • Tool Setter (Renishaw OMP40

Please contact our parts department at 310-370-5990.

There are no brochures for this product at this time.

Get a Quote

*Prices may vary based on location