SV-2414A-F
| Travel | 24 x 14 x 18 in. |
|---|---|
| Taper, RPM | 40, 8k |
| Tool Capacity | 16 T |
| Spindle Motor | 15 HP |
Overview
This is a compact, simple, easy to use VMC. It has box ways that can withstand heavier cutting force than linear ways. It comes standard with many accessories that are usually optional in other machines.
- FANUC Oi-MF, 10.4” LCD color screen
- Travel X/Y/Z: 24” / 14” / 18”
- Table: 27.6” x 13.8”
- Hardened and ground box ways
- Spindle: 8K RPM, CAT 40 Big Plus, Belt Driven, 15 HP Motor
- ATC: Carousel 16 Tools
- Positioning Accuracy X/Y/Z: (+/-0.00015”)
- Machine size w/o Chip Conveyor: W/D/H (114” / 82” / 93”)
- Machine height can be adjusted to fit most garage doors
- All guide ways are induction hardened and then precision ground
- Each axis is driven by a high precision double-nut ball screw that is centered between the guide ways.
- The ball screws are pretensioned and anchored at both ends with angular contact bearings. Ball screws using single nuts or ones that are not pretensioned will have much greater play and backlash which can lead to problems with chatter and accuracy
Features
Precision through Craftsmanship and Technology
Structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy (straightness and squareness) of the whole assembly. This provides near perfect alignment assuring long term accuracy.
Box way construction
The slide ways are hand scraped, hardened and ground. Box ways have superior vibration damping capacity than linear ways and can be used on severe machining applications. During a crash, they are less susceptible to damage due to large contact surface.
Fully protected spindle
The spindle is designed with air curtain and air blast at tool change to prevent small chips from entering the inside of the quill. Around the spindle, there are coolant nozzles for cutting operation and air nozzle for cutting dry.
FANUC Oi-MF control
The control panel comes with 10” color screen and software such as high speed AICC, 200 blocks look ahead, rigid tapping, manual guide Oi, and extra M codes
The operating panel is equipped with detachable MPG (Manual Pulse Generator), USB port, and embedded Ethernet.
Specs
| Work Capacity | Inch | Metric |
|---|---|---|
| X axis travel | 24 in. | 610 mm |
| Y axis travel | 14 in. | 360 mm |
| Z axis travel | 18.1 in. | 460 mm |
| Spindle nose to table | 2.8~20.9 in. | 70~530 mm |
| Spindle center to column | 16.3 in. | 415 mm |
| Worktable | Inch | Metric |
|---|---|---|
| Table area | 27.6*12.1 in. | 700*308 mm |
| Max. work piece weight | 770 Lbs | 350kgs |
| T-Slot (Number x Width x Pitch) | 4*0.6*2.5 in. | 4*16*62.5 mm |
| Spindle | Inch | Metric |
|---|---|---|
| Spindle taper | CAT40 | CAT40 |
| Spindle speed | 8,000RPM | 8,000RPM |
| Spindle motor: cont. / 15 min | 10/15 HP | 7.5/11 KW |
| Transmission | Belt | Belt |
| Automatic Tool Changer | Inch | Metric |
|---|---|---|
| ATC type | Carousel | Carousel |
| Tool capacity | 16 T | 16 T |
| Max. tool diameter | 3.7 in. | 93 mm |
| Without adjacent tool | 5.9 in. | 150 mm |
| Max. tool length | 11.8 in. | 300 mm |
| Max. tool weight | 15 lbs. | 7KG |
| Tool change time (tool to tool) | 2 sec | 2 sec |
| Tool change time (chip to chip) | 8.1sec | 8.1sec |
| Motion | Inch | Metric |
|---|---|---|
| Rapid traverse | X/Y:787.4 in. / min, Z:708.7in. / min | X/Y:2000 mm / min, Z:1800 mm/min |
| Cutting feed rate | 0.04~393.7 in. | 1~10,000 mm / mins |
| Positioning accuracy* | 0.0002 in | 0.005 mm |
| Repeatability accuracy* | 0.0002 in | 0.005 mm |
| Ballscrew diameter, pitch | 1.3in. / 0.4in. | 32mm / 10mm |
| X/Y/Z servo motors for Fanuc control | X/Y:5.9 ft-lb ,Z:8.8ft-lb | X/Y:8Nm ,Z:12Nm |
| Coolant System | Inch | Metric |
|---|---|---|
| Coolant tank capacity | 40 gal | 150L |
| Number of Coolant Nozzles | 4 | 4 |
| Machine Size | Inch | Metric |
|---|---|---|
| Floor space (w/o chip conveyor) | 72.8 * 71.9 in. | 1850 mm * 1825 mm |
| Height** | 94.5 in. | 2400 mm |
| Weight | 5500 lbs. | 2500 kgs |
| Power Requirements | Inch | Metric |
|---|---|---|
| Electrical | 15KVA / 3PH, 220V 50/60 HZ | 15KVA / 3PH, 220V 50/60 HZ |
| Air | 85 psi | 6.0kgf / cm² |
Accessories
Standard Accessories
- 4th axis prepped for rotary table (cables only, no motor, no drive)
- Rigid tapping
- Coolant gun, air gun
- 512 K memory, 200 blocks look ahead
- USB port, CF card, RS-232 I/F, embedded ethernet
- Electric cabinet heat exchanger
- 4 Extra M codes
- Removable electronic handwheel (MPG
- Air reservoir tank with alarm
- Spindle air curtain
- Chip coolant flush
- Coolant nozzle: 4, air blow nozzle: 1
- Coolant tank capacity: 42 gal
- Electrical: 220V / 3 Ph / 20 KVA
- Full metal enclosure with removable side door
- Pull out chip cabinet
Optional Accessories
- Chip auger
- Hinge type flat chip conveyor with bucket
- Oil skimmer
- Coolant thru spindle (CTS), prepped 20-bar (1,000 psi)
- CTS pump (cool jet t8-300), 300 psi,
- 40 gallon tank (requires CTS prepped)
Related Products
You may also like…
CNC MachinesSV-2500-Series
Travel 25 x 17 x 18, 23 in. Taper, RPM 40, 8k Tool Capacity 16 T, 24 T Spindle Motor 15 hp 
Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.
Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.
Register to keep up to date with our monthly newsletter containing the latest information and specials.