SH-Series

Models: SH-920, SH-1224, SH-1632, SH-1640
Table Size9 x 20 in., 12 x 24 in., 16 x 32 in., 16 x 40 in.
Max Grind Size11 x 24 in., 13 x 28 in., 18 x 36 in., 18 x 44 in.
Center Height20 in., 24 in.
Spindle HP3 hp, 5 hp
Request a Quote
Overview
Features
Specs / Models
Accessories

Overview

The model has automatic longitudinal and cross feed. It offers intermittent and continuous cross feed. The table and saddle both has double V ways. The NC spindle downfeed system is optional.

  • 2-way auto (longitudinal and cross)
  • Optional NC downfeed with ballscrew and servo feed
  • 3 HP motor (SH-920, SH-1224), 5 HP motor (SH-1632, SH-1640)
  • Spindle speed 1,720 rpm
  • Extra wide bed
  • Double longitudinal “V” ways and cross “V” ways
  • Hydraulic table (w/ over travel protection) with pre-set functions
  • Auto crossfeed (intermittent and continuous mode)
  • Slide ways are hand scraped and TURCITE coated

Features

Preset hydraulic table speed control

Preset hydraulic table speed control allows operator to pre-set table feed rate (6 fpm – 83 fpm) so one can have the same speed rate every time the hydraulic table is engaged. The saddle rides on precision, hand scraped double V ways coated with TURCITE for better retaining of lube oil and minimize wear on the ways.

Extensive ribbing work table design

Extensive ribbing design of the work table allows heavy duty grinding, ensures no distortion of the table even under difficult grinding conditions. Double V ways at the bottom of the work table allows precise longitudinal movement during grinding. The saddle is also equipped with double V ways to ensure precise movement of cross travel.

NC spindle downfeed system

Settings include : Zero setting, total depth, rough cut, fine cut and number of spark out. down feed speed, table stop at right or left. Electronic handwheel (MPG) allows manual dialing for down feed operations.

Specs / Models

CapacitySH-920SH-1224SH-1632SH-1640
Max Distance : Table to Spindle Center20 in.
(500 mm)		20 in.
(500 mm)		24 in.
(600)		24 in.
(600)
TableSH-920SH-1224SH-1632SH-1640
Table Size9 x 20 in.
(250 x 500 mm)		12 x 24 in.
(300 x 600 mm)		16 x 32 in.
(400 x 800 mm)		15.8 x 40 in.
(401.32 x 1,016 mm)
Longitudinal Travel39.37-984.25
(11.81-984.25) in./min
1-25 (0.3-25) m/min		39.37-984.25
(11.81-984.25)in./min
1-25 (0.3-25) m/min		39.37-984.25
(11.81-984.25) in./min
1-25 (0.3-25) m/min		39.37-984.25
(11.81-984.25) in./min
1-25 (0.3-25) m/min
Cross Travel11 x 24 in.
(280 x 600 mm)		13 x 28 in.
(340 x 700 mm)		18 x 36 in.
(460 x 900 mm)		17.7 x 44 in.
(447 x 1,117 mm)
Longitudinal Feed Of TableSH-920SH-1224SH-1632SH-1640
Hand Feed Per Revolution0.1 in.
(2.54 mm)		0.1 in.
(2.54 mm)		0.1 in.
(2.54 mm)		0.1 in.
(2.54 mm)
Hydraulic Feed6.6-82 ipm
(167.6 x 2,082.8 mm)		6.6-82 ipm
(167.6 x 2,082.8 mm)		6.6-82 ipm
(167.6 x 2,082.8 mm)		6.6-82 ipm
(167.6 x 2,082.8 mm)
Cross Feed Of SaddleSH-920SH-1224SH-1632SH-1640
Hand Feed Per Revolution0.1 in.
(4 mm)		0.1 in.
(4 mm)		0.1 in.
(4 mm)		0.1 in.
(4 mm)
Hand Wheel Graduation0.0005 in.
(0.02 mm)		0.0005 in.
(0.02 mm)		0.0005 in.
(0.02 mm)		0.0005 in.
(0.02 mm)
Intermittent Feed0.0039-0.39 in./feed
(0.1-10 mm/feed)		0.0039-0.39 in./feed
(0.1-10 mm/feed)		0.0039-0.39 in./feed
(0.1-10 mm/feed)		0.0039-0.39 in./feed
(0.1-10 mm/feed)
Continuous Traverse Feed39.37 in./min
(1000 mm/min)		39.37 in./min
(1000 mm/min)		39.37 in./min
(1000 mm/min)		39.37 in./min
(1000 mm/min)
Vertical Feed of WheelSH-920SH-1224SH-1632SH-1640
Hand Feed Per Revolution0.05 in.
(1.27 mm)		0.05 in.
(1.27 mm)		0.05 in.
(1.27 mm)		0.05 in.
(1.27 mm)
Hand Wheel Graduation0.0001 in.
(0.00254 mm)		0.0001 in.
(0.00254 mm)		0.0001 in.
(0.00254 mm)		0.0001 in.
(0.00254 mm)
NC Down Feed18.9 ipm
(480.06 mm)		18.9 ipm
(480.06 mm)		18.9 ipm
(480.06 mm)		18.9 ipm
(480.06 mm)
MotorsSH-920SH-1224SH-1632SH-1640
Spindle3 HP
(2.23 Kw)		3 HP
(2.23 Kw)		5 HP
(3.72 Kw)		5 HP
(3.72 Kw)
GeneralSH-920SH-1224SH-1632SH-1640
Floor Area (W x H x L)n/a6.4 x 6.13 x 5.91 ft.
(1.95 x 1.86 x 1.80 M)		8.37 x 6.89 x 6.23 ft.
(2.55 x 2.10 x 1.89 M)		8.37 x 7.66 x 6.23 ft.
(2.55 x 2.33 x 1.89 M)
Approximate Weight3,800 lbs.
(1,723.6 Kg)		4,000 lbs.
(1,814.3 Kg)		7,300 lbs.
(3,311.2 Kg)		7,600 lbs.
(3,447.3 Kg)
Power Consumption (220V)5.4 KVA/25 amps5.4 KVA/25 amps8KVA/35 amps8KVA/35 amps
Power Consumption (440V)5.4 KVA/12.5 amps5.4 KVA/12.5 amps4KVA/5.5 amps8KVA/18 amps

All specifications subject to change without notice. Please call to verify.

Accessories

Standard Accessories

  • Coolant System (25 Gal.)
  • Wheel Balancer
  • Wheel Balancing Stand & Arbor
  • Ballscrew on Cross Feed
  • Electronic Crossfeed & Stroke Setting
  • Wheel Flange
  • Grinding Wheel 14” x 1.25“ x 5″(SH-920, SH-1224) 14″ x 1.5″ x 5″(SH-1632, SH-1640
  • Auto Lube System
  • Spindle head rapid up & down
  • Wired 220V or 440V. Please specify
  • Splash guard both front and back

Optional Accessories

  • NC spindle down feed with touch screen, servo motor, ballscrew
  • Auto parallel dresser
  • 15HP Upgraded from 10HP
  • Coolant System w/Paper Filter & Magnetic Separator (30 Gal)
  • Parallel Dresser (Manual)
  • Parallel Dresser (Semi-Automatic)
  • Spare Wheel Adaptor (Flange)
  • Radius and Angle Dresser
  • Mist collection system
Quote$
Get A Quote

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Request a Quote
Package
Connect With a Dealer

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Contact Sharp
Envelope
Receive Updates

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Sign Up
Scroll to Top