LMV-Series

Models: LMV-42, LMV-50
Long. Travel30 & 37 in.
Cross Travel12 in.
Taper, HPR-8, 3 hp
Slide WaysDove Tail

Overview

This model has many unique features compared with most of the other similar machines on the market.

The quill is CNC ground to a mirror finish and chromed to fit the housing resulting in close to jig bore accuracy for quill downfeed.

Tapered gibs installed on the ways allows easy adjustment for long term usage..

The bottom of the saddle, instead of the top of the knee ways, which rides on the knee, is hand scraped for better oil retention and prevent dirt and chips from embedded in the knee ways.

  • 9 x 42 ins table, 12 x 30 ins  travel (LMV-42)
  • 9 x 50 ins table, 12 x 37 ins travel (LMV-50)
  • R-8 spindle, 3 hp , variable speed (60-4,500 rpm)
  • Spindle runout of no more than 0.0002” TIR
  • Hard chromed ways provide long wear resistance
  • Head tilt side to side, up and down
  • One shot lubrication with back flow valve
  • Tapered gibs for adjustment
  • Dual clamps on knee and saddle that locks the knee and table evenly to the column and saddle to avoid skewing. Handles on the clamp are adjustable to 12 different positions.

Features

Improved design of Backlash Eliminator

Backlash Eliminator By Double Nut Design replaces the older design that squeezes a split nut to get rid of backlash. Sharp is the first one to use a double nut design that keeps the feed screw in contact with a pair of bronze nuts. Using a custom tool supplied with the mill, the feed nuts are adjusted to control backlash and held tight with a retaining nut and locking ring.

Patented Knuckle Head design

The New Patented Knuckled-Head Design prevents the head from slipping. The Sharp mills have a knuckle which uses 6 bolts, 3 each side, fitted into circular T-slots with matching nuts securing them from the outside. It locks the head in place for better accuracy and performance than the old design using only 3 bolts to squeeze the casting to hold the head without the T-slots. (Patent No. 5044054)

Better motor shaft support

Roller Bearing Support at the bottom of the motor shaft ensures proper loading, support and alignment of the spindle. It also prevents the distortion of the belts due to tension from long years of milling operation

Patented sliding variable disc movement

Easy Access Lubricating Shaft is designed with an oil channel in the center that is fed by a grease fitting at the lower end for longer motor shaft life. (Patent No. 2848)

Crank Handle Improvements

Thrust Bearings mounted at the end of the table and saddle pre-load the feed screw, eliminating end play for precisely controlled lateral movements.

Specs / Models

CapacityLMV-42LMV-50
Table Size9 x 42 in. (230 x 1066 mm)9 x 50 in. (230 x 1270 mm)
T-slots (No., Size, Pitch)3, 5/8, 2.5 in. (3, 16, 63.5 mm)3, 5/8, 2.5 in. (3, 16, 63.5 mm)
Table Travel : X Longitudinal30 in. (762 mm)37 in. (940 mm)
Table travel : Y Cross12 in. (304 mm)12 in. (304 mm)
Quill travel: Z Vertical5 in. (127 mm)5 in. (127 mm)
Ram Travel12 in. (304.8 mm)12 in. (304.8 mm)
Knee travel : Vertical16 in. (406 mm)16 in. (406 mm)
Spindle Center to Column6.75 - 18.5 in. (171-470 mm)6.75-18.5 in. (171-470 mm)
Spindle Nose to Table Top2.125 - 18 in. (3.1 - 457 mm)2.125-18 in. (3.1-457 mm)
Head, SpindleLMV-42LMV-50
Spindle Nose TaperR-8R-8
Spindle Variable Speed Range60 - 4500 rpm60 - 4500 rpm
Spindle Motor (220V/440V)3 HP (2.25 KW)3 HP (2.25 KW)
Quill Feed (Inch/Min)(3 speeds).0015,.003, .006 in. (.038, .076, .152 mm).0015,.003, .006 in. (.038, .076, .152 mm)
Quill Diameter3.375 in. (85.7 mm)3.375 in. (85.7 mm)
Head Swivel Angle360°360°
Head Tilt Angle (L/R)45°45°
Head Tilt Angle (Up/Down)45°45°
GeneralLMV-42LMV-50
Floor Area (W x D x H)7 x 6.6 x 6.7 ft. (2.1 x 2 x 2 M) 7 x 6.5 x 6.7 ft. (2.1 x 2 x 2 M)
Approximate Weight2,400 lbs. (1,090 Kg.)2,500 lbs. (1,133 Kg.)
Power Consumption (220V)3 KVA/8 amp3 KVA/8 amp
Power Consumption (440V)3 KVA/4 amp3 KVA/4 amp

Accessories

Standard Accessories

  • One Shot Lube System
  • Hard-Chromed Ways
  • Front and Rear Rubber Way Covers
  • Tool box with tools
  • Wired 220V or 440V.

Optional Accessories

  • Auto Lube Pump with 2 Adjustments
  • “Sharp” Power Table Feed with Safety Handle
  • “Sharp” Power Cross Feed with Safety Handle
  • “Sharp” Power Knee Feed with Safety Handle
  • 6 ins “Kurt” Vise with Swivel Base
  • Right Angle Milling Attachment with Arbor            
  • Drill Chuck & Drill Arbor                                      
  • 6 in. Riser Block                                                                  
  • Coolant System with Chip Pan (pump included
  • “Maxi Torque Rite” Power Draw Bar Clamping Kit (52 pcs/Steel Rack)              
  • Halogen Work light
  • CE mark
  • 380V and 575V transformer  
  • UL components upgrade with electrical box
  • UL compliance certificate under State of California
  • Digital Readout System

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Scroll to Top