LMV-MP-2-Series

Models: LMV-MP-2, LMV-49-DVS-MP-2, LMV-50-MP-2
X Travel25, 31 & 32 in.
Y Travel11 in.
Z Travel5 in.
Taper, HPR-8, 3 hp
Request a Quote
Download Brochure
Overview
Features
Specs / Models
Accessories

Overview

This is a simple, easy to use 2 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and quill. The Millpwr G2 CNC has G code and conversational type programming . The CNC system is built on the top quality SHARP vertical mills Model LMV, LMV-50 and LMV-49-DVS frame.

  • (LMV-MP2) 9 x 42” table, 11 x 25×5” travel, vari speed
  • (LMV-50-MP2) 9 x 50” table, 11 x 32 x 5” travel, vari speed
  • (LMV-49-DVS-MP2) 9 x 49” table, 11 x 31 x 5” travel, Digital Vari speed
  • AcuRite Millpwr G2 CNC 2 axes control (Longitudinal, Cross)
  • G code and conversational type programming
  • 2 axes precision ball screws
  • Safety handwheels
  • Auto lube system
  • 3 axes Digital Readout System (table, saddle, quill)

Features

Millpwr G2 Turnkey CNC System w/Software and Hardware

Dimension Functions:

  • ABS/INC, POLAR/CARTESIAN, INCH/METRIC.

Programming:

  • PROGRAM IN/OUT, POSITION/DRILL, MILL LINES, MILL ARC, BLEND (CORNER RADIUS)
  • HOLES (BOLT CIRCLE, RECTANGULAR ARRAY, RECTANGULAR FRAM, LINE),
  • CIRCLE (POCKET, FRAM, RING), RECTANGLE (POCKET, FRAME, SLOT, FACING) 9,999 STEPS OF PROGRAM SIZE

Special Features:

  • CUSTOM POCKETS, REPEAT, ROTATE, MIRROR IMAGE.

Run Options:

  • SINGLE STEP, DRY RUN, GRAPHICS ONLY, MANUAL POSITIONING.

Calculator Functions:

  • GEOMETRY, TRIG.

HARDWARE

Operator Console:

  • EASY TO USE FORMAT. CONVERSATIONAL ENGLISH.  THREE DIMENSIONAL HARD KEYS.  10” FLAT PANEL, COLOR LCD DISPLAY.  REMOTE STOP/GO SWITCH.

Controller Cabinet:

  • HEAVY DUTY ENCLOSURE MODULAR CONSTRUCTION, 1 GHz Intel Celeron MICROPROCESSOR.
  • USB AND RS232 INTERFACE
  • 1” HIGH RESOLUTION DISPLAY WITH 3 D GRAPHICS
  • 115VAC – 20 AMPS

Specs / Models

CapacityLMV-MP-2LMV-49-DVS-MP-2LMV-50-MP-2
Table Size9 x 42 in. (230 x 1066 mm)9 x 49 in. (230 x 1245 mm)9 x 50 in. (230 x 1270 mm)
T-slots (No., Size, Pitch)3, 5/8, 2.5 in. (3, 16, 63.5 mm)3, 5/8, 2.5 in. (3, 16, 63.5 mm)3, 5/8, 2.5 in. (3, 16, 63.5 mm)
Table Travel : X Longitudinal25 in (635 mm)31 in (787 mm)32 in (812 mm)
Table travel : Y Cross11 in (279 mm)11 in (279 mm)11 in (279 mm)
Quill travel: Z Vertical5 in. (127 mm)5 in. (127 mm)5 in. (127 mm)
Ram Travel12 in. (304.8 mm)12 in. (304.8 mm)12 in. (304.8 mm)
Knee travel : Vertical16 in. (406 mm)16 in. (406 mm)16 in. (406 mm)
Spindle Center to Column6.75 - 18.5 in. (171-470 mm)6.75 - 18.5 in. (171-470 mm)6.75-18.5 in. (171-470 mm)
Spindle Nose to Table Top2.125 - 18 in. (3.1 - 457 mm)2.125 - 18 in. (3.1 - 457 mm)2.125-18 in. (3.1-457 mm)
Head, SpindleLMV-MP-2LMV-49-DVS-MP-2LMV-50-MP-2
Spindle Nose TaperR-8R-8R-8
Spindle Variable Speed Range60 - 4500 rpm60 - 4500 rpm60 - 4500 rpm
Spindle Motor (220V/440V)3 HP (2.25 KW)3 HP (2.25 KW)3 HP (2.25 KW)
Quill Feed (Inch/Min)(3 speeds).0015,.003, .006 in. (.038, .076, .152 mm).0015,.003, .006 in. (.038, .076, .152 mm).0015,.003, .006 in. (.038, .076, .152 mm)
Quill Diameter3.375 in. (85.7 mm)3.375 in. (85.7 mm)3.375 in. (85.7 mm)
Head Swivel Angle360°360°360°
Head Tilt Angle (L/R)45°45°45°
Head Tilt Angle (Up/Down)45°45°45°
GeneralLMV-MP-2LMV-49-DVS-MP-2LMV-50-MP-2
Floor Area (W x D x H)7 x 6.6 x 6.7 ft. (2.1 x 2 x 2 M)7 x 6.6 x 6.7 ft. (2.1 x 2 x 2 M) 7 x 6.5 x 6.7 ft. (2.1 x 2 x 2 M)
Approximate Weight2,400 lbs. (1,090 Kg.)2,200 lbs. (1,000 Kg.)2,500 lbs (1,133 Kg.)
Power Consumption (220V)3 KVA/8 amp3 KVA/15 amps3 KVA/8 amp
Power Consumption (440V)3 KVA/4 amp3 KVA/7.5 amps3 KVA/4 amp

Accessories

Standard Accessories

  • Millpwr G2 2 axes CNC system
  • 2 axes ball screws and servo drives
  • Auto lube system
  • 3 axes Digital Readout system
  • Cross Way cover

Optional Accessories

  • Acu-Rite electrical edge finder
  • 6” “Kurt” Vise with Swivel Base
  • Drill chuck 
  • Sharp Power Kneel
  • Coolant System with Chip Pan At Base
  • Power Draw Bar                         
  • R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16”
  • Clamping Kit (52 pcs/steel rack)
  • Halogen Work light
  • Riser block 6
  • 440 V transformer
  • 4th axes Digital Readout System (on knee)
Quote$
Get A Quote

Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.

Request a Quote
Package
Connect With a Dealer

Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.

Contact Sharp
Envelope
Receive Updates

Register to keep up to date with our monthly newsletter containing the latest information and specials.

Sign Up
Scroll to Top