L-Series
Models: 1640L, 1660L, 1860L, 1880L
| Swing | 16 & 18 in. |
|---|---|
| Center Distance | 40, 60 & 80 in. |
| Bore, HP | 3.1 in., D1-8, 7.5 hp |
| Spindle Speed | 40 – 2,000 rpm (12) |
Overview
This model is designed with 3.18” spindle hole which is unique for 16” and 18” swing lathes. Due to its one piece casting machine base, it can support heavier cutting on large diameter materials. The large through hole allows most 3” diameter oil pipes to be machined.
- Models : 1640L 1660L 1860L 1880L
- 16″x 40″, geared head, D1-8 camlock, 3.18″ bore, 7.5 HP, 20-2,000 rpm (12)
- 16″ x 60″, geared head, D1-8 camlock, 3.18″ bore, 7.5 HP, 20-2,000 rpm (12)
- 18″ x 60″, geared head, D1-8 camlock, 3.18″ bore, 7.5 HP, 20-2,000 rpm (12)
- 18″ x 80″, geared head, D1-8 camlock, 3.18″ bore, 7.5 HP, 20-2,000 rpm (12)
- Direct selection for inch/metric threads
- One piece Meehanite casting bed
- 12-speed geared head (40-2,000 rpm)
Features
3.18” spindle bore , largest spindle in this size lathes. More choices for different diameter of materials to be machined.
- All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining.
- High precision pair of matched angular contact bearings supporting the front end of head stock, and rolling bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions.
- Wide range of feeds and threads. Selection done by “pull and lock” handles to avoid slipping in engagement of gears.
Jog button is equipped at headstock for easy engagement of gears before cutting. - Jog button is equipped at headstock for easy engagement of gears before cutting.
- One piece casting bed instead of sheet metal connected legs ensure dampening of vibration and permanent straightness of the bed ways.
- The carriage and cross slide ways are lubricated by push button knobs.
- The removable gap increases the swing by an extra 8” to accommodate larger work pieces that are short in length
- 5 position carriage stop for pre-positioning of carriage feed distance.
- “Tang” in tail stock for easy “knock out” of centers stuck in tailstock
Special package is available that includes 2 axis Digital Readout System, Chuck guard with limit switch, Steady rest, Follow rest and Work light
Specs / Models
| Capacity | 1640L | 1660L | 1860L | 1880L |
|---|---|---|---|---|
| Swing Over Bed | 17 in. (430 mm) | 17 in. (430 mm) | 18.5 in. (470 mm) | 18.5 in. (470 mm) |
| Swing Over Cross Slide | 9.5 in. (240 mm) | 9.5 in. (240 mm) | 11 in. (280 mm) | 11 in. (280 mm) |
| Swing Over Gap | 25.5 in. (650 mm) | 25.5 in. (650 mm) | 27.17 in. (690 mm) | 27.17 in. (690 mm) |
| Gap Width (In Front Of Face Plate) | 11.81 in. (300 mm) | 11.81 in. (300 mm) | 11.81 in. (300 mm) | 11.81 in. (300 mm) |
| Distance Between Centers | 40 in. (1000 mm) | 60 in. (1,500 mm) | 60 in. (1,500 mm) | 86.6 in. (2,200 mm) |
| Headstock | 1640L | 1660L | 1860L | 1880L |
|---|---|---|---|---|
| Spindle Speed | 40-2,000 rpm | 40-2,000 rpm | 40-2,000 rpm | 40-2,000 rpm |
| Spindle Nose | D1-8 Camlock | D1-8 cam-lock | D1-8 camlock | D1-8 camlock |
| Spindle Bore | 2.28 in. (58 mm) | 2.28 in. (58 mm) | 2.28 in. (58 mm) | 2.28 in. (58 mm) |
| Threads and Feeds | 1640L | 1660L | 1860L | 1880L |
|---|---|---|---|---|
| Inch Threads, Number | 4-56 tpi, 36 | 4-56 tpi, 36 | 4-56 tpi, 36 | 4-56 tpi, 36 |
| Metric Threads, Number | 0.5-7mm, 17 | 0.5-7mm, 17 | 0.5-7mm, 17 | 0.5-7mm, 17 |
| Modular Threads, Number | 0.019-0.275 in., 17 (0.5-7mm, 17) | 0.019-0.275 in. ( 0.5 -7 mm) | 0.019-0.275 in. ( 0.5 -7 mm) | 0.019-0.275 in., 17 ( 0.5-7mm, 17) |
| Diametral Pitch Threads, Number | 0.157-2.20 in., 36 (4-56 mm) | 0.157-2.20 in., 36 (4-56 mm) | 0.157-2.20 in., 36 (4-56 mm, 36) | 0.157-2.20 in., 36 (4-56 mm, 36) |
| Longitudinal Feeds | 0.002 - 0.032 in. (0.05-0.82 mm) | 0.002 - 0.032 in. (0.05-0.82 mm) | 0.002 - 0.032 in. (0.05-0.82 mm) | 0.002 - 0.032 in. (0.05-0.82 mm) |
| Cross Feeds | 0.0001 –0.0094 in. (0.02-0.4 mm) | 0.0001 –0.0094 in. (0.02-0.4 mm) | 0.0001 –0.0094 in. (0.02-0.4 mm) | 0.0001 –0.0094 in. (0.02-0.4 mm) |
| Leadscrew Pitch, Diameter | 1.37 in., 35 mm | 1.37 in., 35 mm | 1.37 in., 35 mm | 1.37 in., 35 mm |
| Carriage | 1640L | 1660L | 1860L | 1880L |
|---|---|---|---|---|
| Cross Slide Travel | 9.84 in. (250 mm) | 9.84 in. (250 mm) | 9.84 in. (250 mm) | 9.84 in. (250 mm) |
| Compound Travel | 4.92 in. (125 mm) | 4.92 in. (125 mm) | 4.92 in. (125 mm) | 4.92 in. (125 mm) |
| Compound Width | 4.5 in. (114.3 mm) | 4.5 in. (114.3 mm) | 5 in. (127 mm) | 5 in. (127 mm) |
| Bed | 1640L | 1660L | 1860L | 1880L |
|---|---|---|---|---|
| Bed Length | 84.44 in. (2,145 mm) | 104 in. (2,645 mm) | 104 in. (2,645 mm) | 134 in. (3,415 mm) |
| Bed Width | 11.8 in. (300 mm) | 11.8 in. (300 mm) | 11.8 in. (300 mm) | 11.8 in. (300 mm) |
| Tailstock | 1640L | 1660L | 1860L | 1880L |
|---|---|---|---|---|
| Quill Diameter | 2.28 in. (58 mm) | 2.28 in. (58 mm) | 2.68 in. (68 mm) | 2.68 in. (68 mm) |
| Quill Travel | 5.9 in. (150 mm) | 5.9 in. (150 mm) | 5.9 in. (150 mm) | 5.9 in. (150 mm) |
| Quill Center Taper | MT #4 | MT #4 | MT #4 | MT #4 |
| General | 1640L | 1660L | 1860L | 1880L |
|---|---|---|---|---|
| Spindle Motor | 7.5 HP (5.625 Kw) | 7.5 HP (5.625 Kw) | 7.5 HP (5.625 Kw) | 7.5 HP (5.625 Kw) |
| Voltage | 230V/460V | 230V/460V | 220V/440V | 230V/460V |
| Phase | 3 phase | 3 Phase | 3 Phase | 3 Phase |
| Power Consumption (220 V) | 8KVA/25 amps | 8KVA/25 amps | 8KVA/25 amps | 8KVA/25 amps |
| Power Consumption (440 V) | 8KVA/12.5 amps | 8KVA/12.5 amps | 8KVA/12.5 amps | 8KVA/12.5 amps |
| Approximate Weight | 3,461.26 lbs. (1,570 Kg) | 3,814 lbs. (1,730 Kg) | 3,924.22 lbs. (1,780 Kg) | 4,894.26 lbs. (2,220 Kg) |
| Dimensions | 7.05 x 2.66 x 3.9 ft. (2.15 x 0.81 x 1.19 M) | 8.69 X 2.66 X 3.9 FT (2.65 X 0.81 X 1.19 M) | 8.69 x 2.66 x 4 ft. (2.65 x 0.81 x 2.22 M) | 11.22 x 2.66 x 4 ft. (3.42 x 0.81 x 2.22 M) |
Accessories
Standard Accessories
- 3-jaw 10″ chuck, 12” Face plate, steady rest
- Removeable gap, back plate
- Coolant system, 4 way tool post
- Full length splash guard
- Center sleeves, dead center, tool kit
- Wired 220V or 440V
Optional Accessories
- 3-jaw 12″ chuck
- 4-jaw 12″ chuck
- Chuck guard
- Tool guard (at front of compound slide with limit switch)
- Lead screw cover (full length, accordion style)
- Safety cover at end of spindle
- UL or CSA electrical components, UL spindle motor, CSA pump motor
Related Products
You may also like…
Manual Machines1340VS
Swing x Center Dist. 13 x 40 in. Spindle Speed 40 – 2,000 rpm vari. speed Bore, HP 1.6 in., D1-4, 3 hp 
Manual Machines1440F
Swing x Center Dist. 14 x 40 in. Spindle Speed 45 – 1.800 rpm (16) Bore, HP 1.5 in., D1-4, 3 hp 
Manual Machines1440V
Swing x Center Dist. 14 x 40 in. Spindle Speed 40 – 2,000 rpm vari speed Bore, HP 1.5 in., D1-4, 3 hp 
Manual MachinesLV-Series
Swing 16 & 18 in. Center Distance 40, 60 & 80 in. Bore, HP 3.1 in., D1-8, 7.5 hp Spindle Speed 20 – 2,000 rpm (2), vari.
Don’t overpay for a competitor’s machine until you see how a high-quality Sharp machine stacks up. Request a quote to see the Sharp difference for yourself.
Contact us to purchase your next machine or to find your local authorized Sharp Precision Machine Tool dealer for genuine parts and service.
Register to keep up to date with our monthly newsletter containing the latest information and specials.