
TMV/FC-3
- 3 axes CNC mill
- FAGOR 8055i Control
- 10 x 50” table, 15.5 x 31” travel
- 3 HP, R-8 spindle, variable speed
Fagor CNC System w/Software and Hardware Features
10.4” color monitor; 512 MB compact flash, 1 MB RAM, conversational and G-code programming with teach-in mode. On-bard profile editor for easy blue print programming, including complex profiles( mini CAD/CAM), 3 D contouring capabilities
Communication includes RS-232, DNC, USB and Ethernet card ( option)
Handheld Manual Pulse Generator ( option )
- Digital Servo Drive System (3 aves)
- Precision Ground Ballscrews
- 3-AxesDRO (table, saddle, quill)
- Self-Lubricating Motor Shaft
- Precision Ground Gibs
- ABEC-7 Super Precision Spindle Bearing
- Roller Bearing Support Lower Portion of Motor Shaft
- Hard Chromed Variable Drive Pulley
- One-Piece Meehanite Casting
- Cross Way Cover
- Dual Cooling Fan
Working surface | 10” x 50” |
T-slot number, size | 3, 5/8” |
Capacity | |
Table travel; x-axis | 28” |
Saddle travel; y-axis | 15.5” |
Ram travel | 18.5” |
Quill travel; z-axis | 5” |
Knee travel | 15.3” |
Throat distance (min-max) | 9.8-28.3” |
Spindle to table top | 1.6-16.9” |
Spindle | |
Motor | 3 HP |
Wiring voltage | 220/440V, 3 phase, 60 H |
Taper | R-8 |
Speeed (vari speed) | 60-4,500 RPM |
Quill feed (IPR) | 0.0015, 0.003, 0.005” |
Accuracy | 0.0002” TIR |
Head tilt; right-to-left (each way) | 90° |
Head tilt; up-and-down (each way) | 45° |
Dimensions and Weight | |
Floor area (w x d) | 70” x 75” |
Height | 88” |
Net weight (approximately) | 3,700 lbs |
Total Power Consumptions | |
220V | 3KVA/15 amps |
440V | 3KVA/7.5 amps |
STANDARD EQUIPMENT:
- Harden and ground box-ways
- Manual Drawbar
- Front and rear way covers
- Automatic Lube System
- Tool Kit includes:
- Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screwdriver, Flat head screw driver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint.
OPTIONAL ACCESSORIES:
- DVS Head wired 220V*
- DVS Head price based on 220V wiring (for 440V – Please see below)
- *440V Transformer – 3HP
- 6” “Kurt” Vise with Swivel Base
- Drill Arbor, order with 2531-6088
- Drill Chuck – Jacobs with Arbor (0-1/2”) R8
- Coolant System with Chip Pan At Base
- “Maxi-Torque Rite” Power Draw Bar
- “ Align” Power Draw Bar
- Factory Installation Charge – PDB, Each
- R-8 Collet (Set of 11) – 1/8” – 3/4” by 1/16”
- Clamping Kit (52 pcs/steel rack)
- Halogen Work light
- Fagor CNC Control Optional Items:
- SSpindle Interface: Start / forward / reverse control. RPM control.
- Coolant on/off interface
- 110 volt transformer
- Remote hand wheel (RPG/100P
- Ethernet network port.
- Upgrades: 2GB compact flash memory. 1M RAM memory. 8055i-PLUS faster CPU
- Digital Probe couture tracing system.
- Forth axes DRO feedback (for index table or knee).
Please contact our parts department at 310-370-5990.
PDF File:
Get a Quote
*Prices may vary based on location