Linear Way Vertical Machining Centers
SVL-2416SX-M
The Sharp SVL series of compact and linear guide way vertical machining centers combine high productivity with great accuracy. All vertical machining centers structural components are made of Meehanite castings and internal ribs running throughout each section. The standard option come with spindle speeds of 10,000 RPM.
For more visit our YouTube page and watch a demonstration of the SVL-2416 with Siemens Control. (click here)
VERTICAL MACHINING CENTER - MODEL SVL-21416SX-M
- 24” x 16” x 18” travel
- Linear way construction
- 1890 in/min (48 M/min) rapid traverse
- 10,000 rpm, CAT 40 spindle
- 24 tools Side Mount type ATC
- Siemens Sinumerik 828D-PPU260 control, 10.4” LCD display
- Small footprint
| Linear Way Vertical Machining Center | SVL-2416S-M | SVL-2416SE-M | SVL-2416SX-M |
| Work Capacity | |||
| Travel X,Y,Z | 24" x 16" x 18.1" (610mm x 356mm x 460) | ||
| Spindle Nose to Table | 7.9 - 23.6 (200mm-600mm) | ||
| Spindle Center to Column | 17 (432mm) | ||
| Work Table | |||
| Table Area | 27.5" x 16.5" (700mm x 420mm) | ||
| Spindle | |||
| Spindle Taper | CAT 40 | ||
| Spindle Max. Speed | 10,000 RPM | ||
| Driving Type | Belt Drive | Belt Drive | Belt Drive (opt. Direct Drive) |
| Motor (30m/cont.) | 9.3/10.7 (7/8 kw) | ||
| Automatic Tool Changer (ATC) | |||
| Magazine type | Carousel | Carousel | Side Mount |
| Magazine Capacity | 10 | 16 | 24 |
| Tool Selection Type | Set Tool Number | Set Tool Number | Random |
| Max. Tool Diameter | 4.3" (110mm) | 3.9" (120mm) | 3" (76.2) |
| w/o adj. tool, max dia. | 6.7" (170mm) | 5.9" (150mm) | 5" (127mm) |
| Max Tool Length | 7.9" (200mm) | 9.8" (250mm) | 12" (304.8mm) |
| Max Tool Weight | 13.2 lbs (6kg) | 15.4 lbs (7kg) | 15.4 lbs (7kg) |
| Air Blast at Tool Change | Standard | ||
| Motion | |||
| Cutting Feed Rate | 0.04 - 393.7 ipm (1-10,000 mm/m) | ||
| Rapid Traverse | X/Y/Z: 1,890 ipm (48,000 mm/m) | ||
| Accuracy | |||
| Positioning Accuracy | 0.00016/0.004 inch | ||
| Repeatability Accuracy | 0.00012/0.003 inch(mm) | ||
| CNC Control Features | |||
| Controller | Siemens | ||
| Control Model | 828D-240.2 | 828D-260.2 | 828D-260.2 |
| Programming Assist | "ShopMill-Conversational Type" | ||
| 4th Axis Support | Optional | Standard | Standard |
| Screen Size | 8.4 | 10.4 | 10.4 |
| Coolant System | |||
| Flood Coolant Nozzles | 2 | ||
| Coolant Tank Capacity | 42 gal. (160 L) | ||
| Chip Pan | Standard | ||
| Power Requirement | |||
| Electrical | 220V (w/ transformer) /3 Phase/20 KVA/60 Hz | ||
| Air | 6 CFM @ 88 psi | ||
| Machine Measurements | |||
| Floor Space | W: 72.8" (1,850 M), w/ side mount 78.2" (2,000M) D: 85" (2,160 M) | ||
| Height | 91.5" (2,325M) | ||
| Door Opening | 25" (635M) | ||
| Weight | 7,260 lbs (3,300) | ||
STANDARD ACCESSORIES
- Siemens 828-260.2 control and drives with ; USB port, 7680m(3MB) memory, Embedded Ethernet, RS-232C interface, 100 blocks look ahead, 4 additional M codes, M30 Auto Power Off
- “Shop Mill- Conversational Type Programming"
- Full metal enclosure with 2 large side doors
- Coolant system with enlarged coolant tank
- Coolant gun
- Auto lubrication system
- Spindle oil chiller
- Rigid tapping
- Air gun
- Removable electronic hand wheel (MPG)
- Door interlock
- Chip pan
- Air accumulator
- Heat exchanger for electric cabinet
- Florescent work light
OPTIONAL ACCESSORIES
- 4th axis kit prepped ( electrics, cables unit)
- 4th axis with rotary table (complete with drives, motor)
- Flat type chip conveyor
- Scales
- Oil skimmer
- Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
- CTS 20 bar (300 psi) pump with tank
- Tool Probe (Renishaw TS27R)
- Tool Setter (Renishaw OMP40
Please contact our parts department at 310-370-5990.
Get a Quote
*Prices may vary based on location
