• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Box Way Vertical Machining Centers
SV-4328SX

This Box Way Vertical Machining Center is an extremely rigid “C” frame design using hardened and ground Box ways. All our vertical machining centers structural components are made of Meehanite castings internal ribs running throughout each section. Each axis is driven by a high Precision double-nut ball screw that is centered between the guide ways. All structural mating surfaces are precision hand scraped to increase the flatness and to improve geometric accuracy.

Call for Special Pricing!

VERTICAL MACHINING CENTER - MODEL SV-4328SX

  • 43.3" x 27.5" x 24 travel, machine weight over 15,000 lbs
  • Induction hardened and ground box ways (X,Y,Z) for rigidity
  • Meehanite cast iron is used on all structural components. Finite Element Analysis
  • (FEA) is used to optimize the structure for rigidity.
  • A wide saddle fully supports the worktable throughout the travel.
  • Fanuc Oi-MD control
  • Fanuc digital AC servo, motors and drives
  • CAT-40 taper spindle with 10,000rpm/25 hp with chiller
  • Double anchored, pre-tensioned and double nut ball screws
  • 20 bars coolant through spindle preparation
Box Way Vertical Machining Center SV-4328SX
Travel Size (x, y, z) 43.3" x 27.56" x 24"
Table Size 51.2" x 25.6"
Maximum Table Load 2200 lb.
Table T-Slot Size 5" x 0.7" x 3.9"
Spindle Center to Column (throat) 28.7"
Spindle Nose to Table Surface 5.1" ~ 29.1"
Floor To Table 33.5"
Spindle Speed (standard) 12,000 rpm (Ceramic bearing)
Taper CAT-40
Spindle Motor 20/25 HP
Cutting Feed Rate (all axes)(MAX) 393 ipm
Rapid Traverse (x,y) 945 ipm
Rapid Traverse (z) 590 ipm
Ball Screw Diameter (X / Y, Z ) & Pitch X/Y: 1.57/0.4 (inch)
Z: 1.57/0.4 (inch)
Transmission Direct Drive
Tool Capacity 24
Max. Tool Diameter 2.99"
Without Adjacent Tool 5.9"
Max. Tool Length 11.8"
Max. Tool Weight 15.4 lb.
Tool Change Time, tool to tool 4.6 sec
Tool Change Time, chip to chip 6 sec
FANUC systems, standard Oi-MD
Positioning Accuracy +/- 0.0002"
Repeatability Accuracy +/- 0.0001"
General Power 220V/ 3 phase/ 60Hz
Air Requirement (psi) 6 CFM @ 88psi

Dimensions and Weight
 
Machine Dimensions 114" x 114" x 122"
Approximate Weight 15,840 Ib.

STANDARD ACCESSORIES:

  • Fanuc Oi-MD control with 10.4" color LCD Screen
  • Remote Jog Handle
  • Fanuc Alpha Series Spindle Motor
  • Spindle Chiller
  • Separate Roll Out Coolant Tank
  • Flood Coolant
  • Large Side Doors
  • Electrical Cabinet Heat Exchanger
  • Automatic Lubrication System
  • Fluorescent Work light

OPTIONAL ACCESSORIES:

  • SV-4328 ST Productivity Package (includes Chip Conveyor, Chip Coolant Flush System, Coolant Gun and 4 Spare M Codes)
  • Fanuc CNC Update Option (2MB Part Program Storage, Data Server with Ethernet, 1GB Flash Memory)
  • Coolant Through the Spindle Pump Option
  • Rotary Table Options, Tsudakoma 6" Indexer
  • Rotary Table Options, Nikken 7" Rotary Table Package
  • Rotary Table Options, Nikken 8" Rotary Table Package
  • Options are Factory Installed

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location