• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
SG820-2AN

CNC programmable downfeed system,
Automatic cross feed (Y), and table feed (X)
Featuring Tool Wear Compensation,
.MPG (Electronic Handwheel)

  • Advanced touch screen downfeed System
  • 8” x 20” Table, 9.25” x 23.6” Travel
  • Automatic Crossfeed
  • Accurate Slot-Grinding Capability
  • Hydraulic System for Table Travel
  • 2 HP Spindle Motor – 3,420 rpm
  • Double “V” Way Cross Travel
  • One “V” One Flat Way Longitudinal Travel
  • Hand Scraped and Turcit B Coated Ways

 

  SG618-2AN SG820-2AN
CAPACITY  
Maximum grinding length 19.7" 21.7"
Maximum grinding width 5.9" 8.7"
Max distance: table to spindle center 15.7”
TABLE  
Working surface (W x L) 6 x 18.3" 8 x 20"
Maximum longitudinal travel 21.6" 23.6"
Maximum cross travel 7" 9.25"
FEED  
Hydraulic feed 3.3-82 ft/min
Hand feed per revolution (longitudinal) 2.7 ft./rev
Graduation of hand wheel (cross) 0.0008"
Hand feed per revolution(vertical) 0.04 in/rev
Graduation of hand wheel (vertical) 0.0001"
Intermittent feed 0.006-0.4”
Continuous transverse feed 47.2 in/min
Hand feed 0.2 in/rev
SPINDLE AND WHEEL  
Spindle motor 1.5 HP 2 HP
Spindle speed 3,600 rpm 3,420 rpm
Grinding wheel, outside diameter 8”
Grinding wheel bore 1.25”
Grinding wheel width 0.63” 0.5”
GENERAL  
Hydraulic motor 1 HP
Floor space (W x H x L) 83 x 51 x 71” 83 x 59 x 78”
Net wt. (approx.) 2,100 lbs 2,600 lbs

STANDARD EQUIPMENT:

  • Grinding Wheel (8” x 0.75” x 1.25”)
  • KANETSU ELECTRO-MAGNETIC CHUCK W/ CONTROL
  • Auto Lube System
  • Coolant System w/ Paper Filter (25 Gal.) & Splash Guard
  • Wheel Adapter/Flange
  • Work Light
  • Wheel Balancing arbor
  • Diamond Dresser
  • Touch screen down feed control
  • Wired 220V or 440V.  Please specify
  • Tool Kit includes:
  • Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint.

OPTIONAL ACCESSORIES:

  • 8”x 20” Kanetsu permanent magnetic chuck                                           
  • 8”x 20” Kanetsu permanent magnetic chuck , fine pole pitch                                                                           
  • 8”x20” Kanentsu electric magnetic chuck w/control                                                                     
  • ***All Magnetic Chucks Includes FREE Installation***

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location