• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
SG618-2AN

CNC programmable downfeed system,
Automatic cross feed (Y), and table feed (X)
Featuring Tool Wear Compensation,
.MPG (Electronic Handwheel)

  • Double “V” Ways for cross travel
  • One “V” way and one flat way for longitudinal travel
  • Both ways are hand-scraped and covered with Turcite B coating
  • Accurate slot grinding achieved using saddle locking system combined with cross feed ballscrew
  • Automatic lubrication system
  • Advanced hydraulic system with independent oil tank provides vibration-free table movement
  • Hydraulic table stroke setting
  SG618-2AN SG820-2AN
CAPACITY  
Maximum grinding length 19.7" 21.7"
Maximum grinding width 5.9" 8.7"
Max distance: table to spindle center 15.7”
TABLE  
Working surface (W x L) 6 x 18.3" 8 x 20"
Maximum longitudinal travel 21.6" 23.6"
Maximum cross travel 7" 9.25"
FEED  
Hydraulic feed 3.3-82 ft/min
Hand feed per revolution (longitudinal) 2.7 ft./rev
Graduation of hand wheel (cross) 0.0008"
Hand feed per revolution(vertical) 0.04 in/rev
Graduation of hand wheel (vertical) 0.0001"
Intermittent feed 0.006-0.4”
Continuous transverse feed 47.2 in/min
Hand feed 0.2 in/rev
SPINDLE AND WHEEL  
Spindle motor 1.5 HP 2 HP
Spindle speed 3,600 rpm 3,420 rpm
Grinding wheel, outside diameter 8”
Grinding wheel bore 1.25”
Grinding wheel width 0.63” 0.5”
GENERAL  
Hydraulic motor 1 HP
Floor space (W x H x L) 83 x 51 x 71” 83 x 59 x 78”
Net wt. (approx.) 2,100 lbs 2,600 lbs

STANDARD EQUIPMENT:

  • Grinding Wheel (8” x 0.63” x 1.25”)
  • KANETSU Chuck with Coolant System (12 Gal) & Splash Guard
  • Auto Lube System
  • Wheel Adapter/Flange
  • Wheel Balancing Arbor
  • Work Light
  • Diamond Dresser
  • Wired 220V or 440V. Please Specify  
  • Programmable Microprocessor down feed with touch screen. (440V requires purchase of a transformer)    
  • Tool Kit includes:
  • Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, oil can, Grease Gun, Rear way cover bracket, Pin for indicator, and Can of paint

OPTIONAL ACCESSORIES:

  • TRANSFORMER                             
  • 6x18” Kanetsu Permanent Magnetic Chuck (Fine Pole)        
  • 6x18” Kanetsu Electro-Magnetic Chuck                
  • 6x18” Kanetsu Electro-Magnetic Chuck (Fine Pole) w/Control    
  • 6x18” Walker Electro-Magnetic Chuck (Fine Pole)    
  •     w/ SMART-1B Control                    
  • *** ALL MAGNETIC CHUCKS INCLUDE FREE INSTALLATION ***
  • “Overhead” Manual Parallel Dresser                
  • Balance Stand                            
  • Extra Wheel Adapter (Flange)                    
  • Dust Collector                            
  • Coolant System w/Paper Filter & Magnetic Separator            (25 Gal, 230V/460V)
  • Coolant System w/Paper Filter & Magnetic Separator (25Ga)  

DIGITAL READOUT SYSTEMS:

  • Fagor 20i D.R.O. (installed*)                            
  • Acu-Rite 200S D.R.O.                         
  • Newall DP700 D.R.O.                         
  • Factory Installation – D.R.O.                                 
  • * Fagor DRO price includes installation

Note:  All prices and specification subject to change

Please contact our parts department at 310-370-5990.

Get a Quote

By submitting this form, you accept the Mollom privacy policy.

*Prices may vary based on location