• Summary
  • Features
  • Specs
  • Accessories
  • Parts
  • Brochure
  • Quote
Model : OD-1324HE, OD-1340HE, OD-1360HE, OD-1380HE

A series of cylindrical grinders that can grind up to 12" outside diameter and 24", 40", 60" and 80" length work piece. It can also grind Inside Diameter from 0.79" to 1.97" and grinding length of 2.17" with the optional swing down type ID attachment. Machine is equipped with manual operated wheelhead infeed, and hydraulic automatic table feed.

  • 12"  grinding outsid diameter, 24", 40", 60" and 80" table feed
  • With optional ID attachment, 0.79"-1.97" max grinding bore, 2.17" max grinding length
  • Workhead can swivel 90degree CCW to 90 degree CW for various grinding ooperations. Workhead swival by electronic control
  • Workhead swivels 45 degree right and left
  • Dual oil cover prevents coolant from going into workhead.
  • 7.5 HP wheelhead spindle motor
  • Wheel head spindle supported on 4 class ABEC 7 bearings
  • Wheel head swivels 30 degree right and left for shoulder grinding
  • Wheel head travels on one V and one flat hand scraped, TURCITE coated ways
  • Easy change of grinding wheel by loosening set screws insead of using special clamps
  • Table swivels 9 deg (24" table feed), 7 deg (40" feed), 5 deg (60" feed), 3 deg (80" feed) side to side,  for taper grinding
  • Table travels on cushion of oil with no metal-to-metal contact.
  • Table is supported on oveersized base in full travel to avoild overhang
  • Table feed rate is variable, from 2 ipm to 40 ipm. Controlled by turning a knob.Longer table feed rate is 1.2 ipm to 275 ipm
  • Optional ID attachcment for ID grinding
  • Optional hydraulic tailstock with foot pedal for easy loading and unloading of parts
 
   
   
   
 
   
   
   
   
   
   
   
   
 
 
  OD1022H/S OD1030H/S
CAPACITY  
Swing over Table 10.6”
Distance Between Center 21.6” 30”
Max Grinding Diameter 10”
Max Load Between Centers (lbs.) 180 280
WHEELHEAD RANGE  
Infeed range 10” (All models)
Auto Infeed Range (S model only) 0.00001” to 0.04” (all S models)
Auto infeed rate (S model only) (in/min) 0.04 – 2.0 ipm (all S models)
Rapid forward and retract 1.6” (all models)
Manual Feed, Graduation (dia.) 0.08”
Manual Feed, Revolution (dia.) 0.0002”
Swivel Angle +/- 15 degrees (all models)
GRINDING WHEEL  
OD x Width x ID 16” x 1.5” x 5”
Optional wheel width 2” (all models)
Wheel Speed 1650 rpm
INTERNAL GRINDING ATTACHMENT (opt)  
Grinding Bore Range 0.6” to 3.9”
Max. Grinding Length 3.9”
Spindle Speed (vari-speed, H-L) 30-180 rpm (L), 100-600 rpm (H) (10" & 12" models only)
Wheel Motor 1 HP
WORK HEAD  
Taper of Center MT#4 (All models)
TABLE  
Auto Feed (variable speed) 2 to 160 ipm (all models)
Manual Feed (per revolution) 0.5“ per revolution of handwheel (all models)
Swivel Towards and Away from Operator 6 degrees and 9 degrees 4 degrees and 9 degrees
TAILSTOCK  
Spindle Stroke 1.25” (All models)
Center Taper MT #4
MOTORS  
Wheel Drive 5 HP
Work head Drive 0.5 HP
Hydraulic Pump Drive 1 HP
TANK CAPACITY  
Coolant tank (gal.) 20
Hydraulic tank (gal.) 15
GENERAL  
Width x Depth (ft.) 10 x 6 14 x 6
Approx. Weight (lbs.) 4,500 5,200

* Specifications are Subject to Change Without Notice.

Standard Accessories

  • 5C Lever Type Collet Closure
  • Auto Lube System
  • Coolant System (12 Gal) with splash guard
  • Grinding Wheel with Flange
  • Wheel Extractor
  • Carbide Tip Center (2)
  • Balancing Arbor with Stand
  • 2 Diamond Dresser (table & tailstock)
  • Wired 220V (440V Requires Optional Transformer)
  • Toolbox & Tools

Optional Accessories

  • 440V Transformer for OD618
  • 3-Jaw Chuck (6”) with Back Plate
  • Insider diameter grinding attachments (3) holders, (3) wheels
  • 6” Magnetic Chuck with Back Plate
  • Spare Wheel Adapter (Flange)
  • Carbide half center
  • Auto drive dogs (6)
  • Double shoe steady rest
  • Triple shoe steady rest
  • Angle dresser, table mounted
  • Radius dresser, table mounted
  • Micro feed for wheel head (S models only)
  • Work rest (2)
  • Balancing Stand
  • Coolant System with Paper Filters (25 gal)
  • Coolant System with Paper Filters and Magnetic Separator (25 gal)
  • Hydraulic tailstock (factory installed)

Please contact our parts department at 310-370-5990.

Get a Quote

*Prices may vary based on location